Integrated Power Designs SRP-30A-2005 30-Watt Power Adapter
Integrated Power Designs AC Power Supply. Frequency range: 47–63 Hz, Current: 1 A at 85 V (True RMS), Current: 30 A peak.
- Model
- Integrated Power Designs SRP-30A-2005
- Calibration
- Available on request
- Price
- $45
- Status
- In stock
- RFQ ref
- SRP-30A-2005
This unit
The Integrated Power Designs SRP-30A-2005 is a 30-watt AC-DC power adapter engineered for medical and industrial applications requiring dual-rail output. It accepts universal input (85–264 VAC, 47–63 Hz) and delivers ±15 V at 1.5 A per rail, with source regulation of 0.5% and output ripple capped at 1%. Natural convection cooling and SMT construction ensure reliability across 0°C to 70°C operation.
Technical Specifications Input
Input voltage range: 85–264 VAC
Frequency range: 47–63 Hz
Input current: 1 A at 85 V (True RMS)
Inrush current: 30 A peak Output
Total power: 28–35 W (model dependent)
Output 1: +15 V / 1.5 A
Output 2: −15 V / 1.5 A
Source regulation (Outputs 1–4): 0.5%
Output ripple and noise: 1% across all outputs
Load regulation (Output 1): 7% across 0–100% load change
Load regulation (Output 2): 5.0% across 0–100% load change
Transient response: 5% voltage deviation during 50–100% load step; 2 mS recovery time
Output voltage adjustment (Output 1): 95–105% Efficiency & Environment
Efficiency: 66–80% (model dependent)
Operating temperature: 0°C to +70°C
Storage temperature: −40°C to +85°C
Humidity: 0–95% RH non-condensing
Operating altitude: 3000 m maximum Physical
Dimensions: 3.0" × 6.0" × 2.0"
Weight: 1.6 lbs
Protection rating: IP30
Cooling: Natural convection
Output connector: 8-pin DIN socket (DS-048)
Key Features
Dual symmetric rails (±15 V) eliminate negative supply design burden
Class B EMC compliance per EN 55022/11 and EN 61000-6-2
Medical-grade isolation: EN 60601-1 certified with 5656 VDC primary-to-secondary dielectric strength (1 sec)
UL Listed and CAN/CSA compliant for North America
Low leakage current: <300 µA earth, <100 µA touch (normal condition)
MTBF: 100,000 hours minimum (MIL-HDBK-217F, 25°C, GB)
Class I protection with Overvoltage Category II secondary rating
Typical Applications
Medical instrumentation and diagnostic equipment
Industrial control and sensing systems
Audio-video processing platforms
Compatibility & Integration Connect via 8-pin DIN socket. Dual-output architecture supports systems requiring matched ±15 V rails with tight regulation. Compact 1.6 lb form factor fits space-constrained enclosures.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 47–63 Hz | Voltage / Current Range: −15 V / 1.5 A output, 85–264 VAC input |
Integrated Power Designs SRP-30A-2005 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Integrated Power Designs SRP-30A-2005. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Integrated Power Designs SRP-30A-2005 price
This Integrated Power Designs SRP-30A-2005 is listed at $45. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Integrated Power Designs SRP-30A-2005 calibration cost
NIST-traceable calibration for the Integrated Power Designs SRP-30A-2005 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
