Agilent/Keysight UXR1104A
Agilent / Keysight Digital Oscilloscopes. Bandwidth: 110 GHz, Channels: 4 full-bandwidth, Sample Rate: 256 GSa/s across all channels.
- Model
- Agilent / Keysight UXR1104A
- Calibration
- Available on request
- Price
- $845,000
- Status
- In stock
- RFQ ref
- UXR1104A
This unit
The Keysight UXR1104A Infiniium UXR-Series Oscilloscope delivers 110 GHz bandwidth across four full-bandwidth channels at 256 GSa/s, engineered for high-speed signal analysis in technology development. With intrinsic jitter below 25 fs (rms), a 40 dB minimum SNR at 110 GHz, and ultra-low noise performance, this instrument resolves the fastest transient phenomena with exceptional precision.
Technical Specifications
- Bandwidth: 110 GHz
- Channels: 4 full-bandwidth
- Sample Rate: 256 GSa/s across all channels
- Memory Depth: Up to 2 Gpts per channel
- ADC Resolution: 10-bit
- Input Impedance: 50 Ω (±3%)
- Input Connector: 1 mm ruggedized with AutoProbe III interface
- Rise/Fall Time: 5.6 ps (10-90%), 3.9 ps (20-80%)
- Noise Floor: <1 mVrms
- Trigger Jitter: <1 ps typical in trigger path
- Intrinsic Jitter: <25 fs (rms)
- Inter-channel Jitter: <10 fs (rms)
- Minimum SNR: 40 dB at 110 GHz
- Channel-to-channel Skew: <10 ps
- Processing: 5 trillion IOPS measurement acceleration ASIC
- Power Requirements: 200–240 VAC, 50/60 Hz; 2615 VA maximum
- Dimensions: 435 mm W (handles removed), 513 mm D, 311 mm H (7U, feet removed)
- Weight: 42.05 kg
Key Features
- Serial Data Analysis (SDA) with clock recovery included
- Optional on-site self-calibration module
- InP process chipsets for high-speed performance
- USB 3.0 and LAN interfaces for data transfer and remote control
- Multiple file format support: *.wfm, *.csv, *.tsv, *.bin, *.txt, *.hf5, *.osc
- Edge trigger up to 110 GHz bandwidth; OR'd edge trigger modes
- User-defined measurement functions
Typical Applications High-speed serial protocol characterization, jitter analysis, signal integrity validation, and transient measurement in RF/microwave development and research.
Compatibility & Integration Works with Keysight InfiniiMax III and III+ probing solutions. Supports Keysight PathWave software suite. Compatible with embedded and low-speed protocol decode/trigger for USB2.0, eUSB2, 10/100 ETH, PCIe 2/1, I2C, SPI, RS232, I2S, and JTAG.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | DC to 110 GHz | Voltage / Current Range: ±0.40 V to ±4.00 V offset range |
Agilent / Keysight UXR1104A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight UXR1104A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Agilent / Keysight UXR1104A price
This Agilent / Keysight UXR1104A is listed at $845,000. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight UXR1104A calibration cost
NIST-traceable calibration for the Agilent / Keysight UXR1104A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →