HP / Agilent 66311D DC Source 0-15V 0-3A
The HP/Agilent 66311D is a DC power supply with a voltage range of 0-15V and a current range of 0-3A. It provides stable and reliable DC power for a variety of electronic testing and development applications. This unit features programmable voltage and current limits, as well as overvoltage and overcurrent protection to safeguard connected devices. Ideal for benchtop use in labs or automated testing systems.
- Model
- HP / Agilent 66311D
- Calibration
- Available on request
- Price
- $191
- Status
- In stock
- RFQ ref
- 66311D
This unit
The HP/Agilent 66311D is a DC power supply engineered for high-throughput automated testing in digital wireless communications. It delivers 0–15 V at 0–3 A continuous output, with peak current capability to 5 A for up to 7 ms, and supports current sinking to 2.8 A for battery charger validation. The unit features a built-in digital voltmeter (DVM) and automatic open-sense detection to prevent improper remote voltage settings and ensure accurate device under test calibration. Rapid transient response - recovering to within 20 mV of final value in less than 35 µs following 0.1–1.5 A load steps - minimizes voltage dip (70 mV) during pulsed current demands typical of modern digital devices.
Technical Specifications Output Ratings
Voltage: 0–15 V
Continuous Current: 0–3 A
Peak Current (7 ms max): 5 A
Current Sinking: up to 2.8 A Accuracy (25°C ±5°C)
Voltage Programming: ±10 mV (% of setting + fixed value)
Current Programming: ±1.33 mA (% of setting + fixed value)
DC Readback: ±0.04% of setting + 5 mV
AC + DC RMS Readback (60 Hz–10 kHz, > 25 mVrms): ±1% of setting + 5 mV Ripple and Noise (20 Hz–20 MHz)
Voltage RMS: 1 mV
Voltage Peak-to-Peak: 6 mV
Current RMS: 2 mA Transient Response
Recovery Time: < 35 µs (within 20 mV of final value)
Voltage Dip: 70 mV Physical
Dimensions: 212.8 mm W × 88.1 mm H × 435 mm D
Weight: approximately 9 kg
Steel chassis construction Environmental
Operating Temperature: 0°C to 55°C
Humidity: up to 95% relative humidity
Altitude: up to 2000 m
Installation Category II, Pollution Degree 2
Key Features
Built-in DVM for precision voltage measurement
Microampere-range measurement capability for sleep-mode characterization
Dynamic current pulse measurement for multi-mode battery drain analysis (talk, active, standby, sleep)
Overvoltage and overcurrent protection
Automatic open sense-connection detection
Typical Applications
Digital wireless device battery charger testing
Pulsed-load battery drain characterization
Device under test power delivery validation
Sleep and active-mode current profiling
Compatibility & Integration
HP-IB (IEEE 488.2, SCPI command set) interface
RS-232 available on select configurations
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 0-15V, 0-3A (continuous) |
HP / Agilent 66311D — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the HP / Agilent 66311D. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
HP / Agilent 66311D price
This HP / Agilent 66311D is listed at $190.6. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
HP / Agilent 66311D calibration cost
NIST-traceable calibration for the HP / Agilent 66311D is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
