Anritsu MU110010A – Multirate Module 10G
The Anritsu MU110010A is a multirate module designed for 10G network testing. It supports various data rates and protocols, enabling comprehensive analysis and validation of high-speed network performance. Ideal for R&D, manufacturing, and field testing of 10G Ethernet and other communication systems.
- Model
- Anritsu MU110010A
- Calibration
- Available on request
- Price
- $3,500
- Status
- In stock
- RFQ ref
- MU110010A
This unit
The Anritsu MU110010A is a multirate module engineered for high-speed network interface and system testing up to 10 Gbps. Installed within the MT1100A Network Master Flex mainframe, this module delivers in-service and out-of-service transmission quality measurements across multiple protocols and physical interfaces. It supports OTN, Ethernet, SDH/SONET, PDH/DSn, Fibre Channel, eCPRI/RoE/CPRI/OBSAI, Synchronous Ethernet, PTP (IEEE 1588 v2), and TCP throughput testing per RFC 6349. The module handles data rates from 1.5 Mbps to 10 Gbps, with dual-channel configurations supporting up to 2.7 Gbps and single/dual channels up to 10 Gbps.
Technical Specifications
Data Rate Range: 1.5 Mbps to 10 Gbps; dual-channel operation up to 2.7 Gbps; single or dual channels up to 10 Gbps
Port Configuration: Two ports for all rates and interfaces
Physical Connectors: RJ48, BNC Tx/Rx, Bantam Tx/Rx, RJ45, SFP/SFP+; CFP and QSFP+ supported via related modules
Supported Protocols: OTN (including OTU4 and multistage mapping), Ethernet, SDH/SONET, PDH/DSn, Fibre Channel, eCPRI/RoE (IEEE 1914.3), CPRI/OBSAI, SyncE, PTP, TCP throughput, mobile fronthaul/backhaul, carrier access, metro/core networks
Key Features
Bit Error Rate (BER) testing across OTN, Ethernet, SDH/SONET, PDH/DSn, and Fibre Channel
RFC 2544 and Y.1564 Ethernet compliance testing
TCP throughput tests to 10 Gbps per RFC 6349
eCPRI/RoE frame BER and latency measurements
CPRI/OBSAI interface BER validation
ODU multiplexing and ODU Flex support
Throughput and latency measurements
Link status monitoring and error/alarm detection
Return Delay Time characterization
Frame capture for real-time troubleshooting
Simultaneous multi-user remote operation via MX100001A software
Typical Applications
Mobile fronthaul and backhaul commissioning
Carrier access network commissioning and maintenance
Metro and core network testing
Manufacturing and field validation
Research and development
Compatibility & Integration The MU110010A installs directly into the MT1100A Network Master Flex mainframe and operates alongside complementary modules including the MU110011A (100G Multirate Module) and MU110012A (40/100G Module). The MT1100A mainframe accepts power from the MU110001A (Battery and AC Supply) or MU110002A (AC-only High Power Supply).
Anritsu MU110010A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MU110010A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu MU110010A price
This Anritsu MU110010A is listed at $3,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MU110010A calibration cost
NIST-traceable calibration for the Anritsu MU110010A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
