Agilent/Keysight N2833A
Agilent / Keysight Laboratory Measurement Instruments.
- Model
- Agilent / Keysight N2833A
- Calibration
- Available on request
- Price
- $2,250
- Status
- In stock
- RFQ ref
- N2833A
This unit
The Agilent/Keysight N2833A is a passive probe engineered for signal acquisition across general-purpose measurement applications. It maintains signal integrity between the device under test and oscilloscope, delivering high signal fidelity for accurate waveform capture in laboratory and field environments.
Technical Specifications
Probe Type: Passive Input Impedance: 10 MΩ Attenuation Ratio: 10:1 (typical for passive probes in this series) Input Capacitance: Minimized to reduce loading effects on the circuit under test Compensation: Low-frequency and high-frequency compensation adjustment supported Connector: BNC interface to oscilloscope inputKey Features
- Fixed 10:1 attenuation for standardized measurement scaling
- High input impedance (10 MΩ) minimizes circuit loading
- Compensation adjustments enable precise impedance matching to oscilloscope input
- AutoProbe interface enables automatic probe identification and instrument configuration on compatible oscilloscopes
Typical Applications
- General-purpose signal measurement and acquisition
- Waveform analysis requiring detailed signal capture
- Circuit troubleshooting and characterization in development environments
Compatibility & Integration The N2833A connects to Keysight InfiniiVision and Infiniium Series oscilloscopes with 1 MΩ BNC input impedance. AutoProbe-enabled oscilloscopes automatically detect the probe and configure the correct input impedance, attenuation setting, and power delivery. This intelligence simplifies setup and eliminates manual configuration errors on compatible instruments.
Agilent / Keysight N2833A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight N2833A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Agilent / Keysight N2833A price
This Agilent / Keysight N2833A is listed at $2,250. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight N2833A calibration cost
NIST-traceable calibration for the Agilent / Keysight N2833A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
