Lecroy 104MXs-B WaveSurfer Mixed Signal Oscilloscope, 1GHz, 4 Channel

Lecroy Mixed Signal Oscilloscopes (MSO). Sample rate: 10 GS/s (2-channel), Sample rate: 50 GS/s, Channels: 18 (MSO configuration).

Model
Lecroy 104MXs-B
Calibration
Available on request
Price
$17,979
Status
In stock
RFQ ref
104MXs-B
View cart
Prefer to talk? Call +1 (484) 841-9341

This unit

The LeCroy 104MXs-B WaveSurfer is a 1 GHz mixed-signal oscilloscope engineered for signal integrity analysis, embedded systems debugging, and general-purpose testing. It delivers 10 GS/s single-shot sample rate in 2-channel mode and 5 GS/s in 4-channel mode, with 50 GS/s equivalent sampling. The instrument captures up to 16 Mpts per channel (32 Mpts interleaved) and expands to 18 digital channels at 250 MHz capture speed when configured as an MSO.


Its intuitive MAUI interface and 10.4-inch color touchscreen display streamline navigation across complex waveforms and datasets.


Technical Specifications

Acquisition System

  • Single-shot sample rate: 10 GS/s (2-channel), 5 GS/s (4-channel)

  • Equivalent sample rate: 50 GS/s

  • Memory depth: 16 Mpts/channel standard; 32 Mpts interleaved

  • Maximum digital signal speed: 250 MHz

  • Digital channels: 18 (MSO configuration) Vertical System

  • Bandwidth: 1 GHz

  • Rise time: 300 ps

  • Input channels: 4 analog + 18 digital (MSO)

  • Input impedance: 1 MΩ ±1.0% (16 pF ±2 pF) or 50 Ω ±1.0%

  • Input coupling: AC, DC, GND

  • Maximum input voltage: ±250 Vpk (1 MΩ); 5 VRMS (50 Ω)

  • Channel isolation: ≥40 dB at 100 MHz; ≥30 dB at 1 GHz

  • Vertical resolution: 8 bits

  • Sensitivity: 2 mV/div to 10 V/div (1 MΩ); 2 mV/div to 1 V/div (50 Ω)

  • DC gain accuracy: ±1.5%

  • Bandwidth limiters: 20 MHz, 200 MHz Triggering System

  • Modes: Normal, Auto, Single, Stop

  • Sources: Ch 1–4, EXT, EXT/10, AC line

  • Coupling: AC, DC, LF Rej, HF Rej

  • Trigger sensitivity: 1.0 division @ 200 MHz; 1.5 divisions @ 600 MHz; 2.0 divisions @ 1 GHz

  • External trigger sensitivity: 50 mV (DC–10 MHz), 200 mV (10 MHz–600 MHz) for Ext; 0.5 V / 2.0 V for Ext/10

  • Cross-triggering: Analog and digital cross-pattern supported Mixed Signal & Serial Decode


Supports I2C, SPI, UART, RS-232, USB, I2S, LJ, RJ, TDM, MIL-STD-1553, ARINC 429, MIPI D-PHY, DigRF, CAN, LIN, FlexRay, SENT, Manchester, and NRZ protocols. Display

  • Type: 10.4-inch color touchscreen

  • Resolution: 800×600

  • WaveStream intensity-graded display with 256 levels

Specifications

ParameterValue
Frequency RangeDC to 1 GHz | Voltage / Current Range: ±250 Vpk (1 MΩ input)

Lecroy 104MXs-B — Repair & Calibration Service

Aumictech offers NIST-traceable calibration and repair for the Lecroy 104MXs-B. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.

Standard Cal
$450
Pass/fail cert + NIST sticker
Cal with Data
$650
Full NIST cert with measured values

Lecroy 104MXs-B price

This Lecroy 104MXs-B is listed at $17,979. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.

Lecroy 104MXs-B calibration cost

NIST-traceable calibration for the Lecroy 104MXs-B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →

Documents