Keysight 33611A 80MHz Waveform Generator
Keysight Arbitrary Waveform Generators. Resolution: 14-bit, Voltage: 100–240 Vac ±10%.
- Model
- Keysight 33611A
- Calibration
- Available on request
- Price
- $3,200
- Status
- In stock
- RFQ ref
- 33611A
This unit
The Keysight 33611A is an 80 MHz single-channel arbitrary waveform generator built on Trueform technology, delivering signal integrity and measurement precision far beyond traditional DDS architectures. It generates sine waves to 80 MHz, pulses to 100 MHz, and supports nine standard waveforms plus user-defined arbitrary signals up to 4 MSa (expandable to 64 MSa). Sampling at 660 MSa/s or 1 GS/s with 14-bit amplitude resolution, the instrument achieves 0.03% THD, 1 ps jitter, and phase noise of −125 dBc/Hz - enabling reliable performance in design validation, component characterization, and education.
The 33611A operates in five modes: Continuous, Modulate, Frequency Sweep, Counted Burst, and Gated Burst. It applies AM, FM, PM, FSK, BPSK, PWM, and waveform summing across its full frequency range (1 µHz to 80 MHz sweep capability). Amplitude spans 1 mVpp to 10 Vpp into 50 Ω or 2 mVpp to 20 Vpp open-circuit, with 4-digit resolution.
Harmonic distortion on sine waves runs 5× lower than comparable DDS generators. Waveform creation flows through front-panel editing, direct capture from oscilloscopes, or external design in MATLAB and Excel. Trueform sequencing and summing allow construction of complex multi-tone signals without additional channels.
Two-channel models can combine up to four waveforms.
Technical Specifications
- Frequency: 80 MHz sine, 100 MHz pulse maximum
- Sampling Rate: 660 MSa/s, 1 GS/s
- Arbitrary Memory: 4 MSa standard; 64 MSa with Option MEM
- Amplitude Resolution: 14-bit; 4-digit display
- Amplitude Range: 1–10 Vpp (50 Ω); 2–20 Vpp (open circuit)
- Distortion: 0.03% THD; 5× lower harmonics versus DDS
- Jitter: 1 ps; Phase Noise: −125 dBc/Hz
- Sweep Range: 1 µHz to 80 MHz
- Modulation: AM, FM, PM, FSK, BPSK, PWM, Sum
- Line Voltage: 100–240 Vac ±10%, 50/60 Hz
Key Features
- Trueform signal architecture for enhanced precision and low distortion
- Nine built-in waveforms; nine additional preset arbitrary shapes
- Front-panel and external waveform editing; MATLAB/Excel integration
- Waveform sequencing and summing without dual-channel hardware
- Five operating modes including frequency sweep and gated/counted burst
Typical Applications
- Electronic design and prototype validation
- Component and subsystem characterization
- Signal integrity and jitter analysis
- Educational laboratory instruction
Compatibility & Integration
- USB and LAN (LXI-Core) interfaces standard
- Optional GPIB (3446GPBU)
- External triggering and remote control via BenchVue, VEE, and LabVIEW
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 1 µHz to 80 MHz (sine) |
| up to 100 MHz (pulse) | Voltage / Current Range | 100–240 VAC ±10%, 2–20 Vpp (open circuit), 50/60 Hz |
| Amplitude | 1–10 Vpp (50 Ω) |
Keysight 33611A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Keysight 33611A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Keysight 33611A price
This Keysight 33611A is listed at $3,200. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Keysight 33611A calibration cost
NIST-traceable calibration for the Keysight 33611A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
