HP / Agilent 6692A 6600-Watt System Power Supply, 60V, 110A

The HP/Agilent 6692A is a 6600 W DC power supply engineered for high-current test and manufacturing applications. It delivers 0–60 V at 0–110 A with low noise performance (2.5 mV RMS, 25 mV peak-to-peak across 20 Hz to 20 MHz) and programming accuracy of 0.04% + 60 mV for voltage and 0.1% + 65 mA for current. The unit accepts 208 VAC or 400 VAC 3-phase input (47–63 Hz) and operates from both analog and SCPI command interfaces, integrating readily into automated test systems via GPIB with 20 ms command response time. Remote sense capability compensates for load-lead voltage drops up to half the rated output voltage. Built-in overcurrent, overvoltage, and overtemperature protection guards against DUT damage. Three units can be paralleled to increase current capacity. Its physical footprint matches the Agilent 6680 Series 5000 W supplies, enabling system expansion without additional rack space.

Technical Specifications

Output power: 6600 W maximum

Voltage: 0–60 V

Current: 0–110 A

Ripple & noise: 2.5 mV RMS; 25 mV peak-to-peak (20 Hz–20 MHz)

Programming accuracy (25 ±5 °C): voltage 0.04% + 60 mV; current 0.1% + 65 mA

AC input: 208 VAC (180–235 VAC, 3-phase, 47–63 Hz, 36 A max worst case) or 400 VAC (360–440 VAC, 3-phase, 47–63 Hz, 18 A max worst case)

Input power: 9000 VA / 7950 W maximum; 175 W no-load

Constant current (RMS): 30 mA (>5 µH load inductance), 50 mA, 200 mA

Key Features

Dual programming interfaces: SCPI commands and analog voltage/current control

Front panel meters and rear panel analog monitoring outputs

Remote sense to ±30 V

Overcurrent, overvoltage, and overtemperature protection

Parallel-capable design (up to 3 units)

IVI and VXI Plug & Play driver support

20 ms average response time via GPIB

Typical Applications

High-power device testing and validation

Automated manufacturing test systems

Power conversion and battery simulation

Thermal stress and endurance testing

Compatibility & Integration Physical dimensions: 425.5 W × 221.5 H × 674.7 mm D. Compatible form factor with Agilent 6680 Series for modular rack configurations.