Kepco BOP500M
Kepco High Voltage Power Supplies. Voltage: stabilizing or current-stabilizing modes with inde, Voltage: ±500 V DC, Current: ±80 mA DC.
- Model
- Kepco BOP500M
- Calibration
- Available on request
- Price
- $3,100
- Status
- In stock
- RFQ ref
- BOP500M
This unit
The Kepco BOP 500M is a high-voltage bipolar operational power supply and amplifier engineered for precision applications requiring both sourcing and sinking capability. It operates in voltage-stabilizing or current-stabilizing modes with independent control channels for local or remote operation. The Class A output stage delivers bidirectional response from zero, ensuring linear transitions across the full rated voltage and current ranges with no polarity switching.
Technical Specifications Electrical Performance
Output Voltage: ±500 V DC
Output Current: ±80 mA DC
Power Output: 40 W
Input Power: 105–125 V AC or 210–250 V AC, 50–65 Hz (front panel selectable)
Power Consumption: Approximately 250 W
Power Factor: 0.8
Operating Temperature: -20°C to +65°C
Storage Temperature: -40°C to +85°C Output Characteristics
Four-quadrant linear operation with source and sink capability up to 100% rated current
Output Impedance (Voltage Mode): 0.05 Ω series resistance, 5 mH series inductance
Output Impedance (Current Mode): 100 MΩ shunt resistance, 0.3 µF shunt capacitance
Peak-to-peak ripple measured over 20 Hz to 10 MHz bandwidth
Key Features
Dual-mode operation: voltage-stabilizing with adjustable current limiting and current-stabilizing with adjustable voltage limiting
Independently adjustable voltage and current limits (programmable)
FET output stage preamplifiers for summing and scaling arbitrary input signals
Zeroable preamplifiers with minimum 20,000 V/V open-loop gain
Uncommitted amplifier configuration available
Natural convection cooling; optional forced-air cooling available
Interfaces and Control
Front panel local control with mode selection
Remote programming via 30-terminal rear connector
Separate control channels for output voltage and current
Physical and Environmental
Manufacturer: Kepco, Inc.
Cooling: Natural convection (forced-air option available)
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | ±500 V DC, ±80 mA DC |
Kepco BOP500M — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Kepco BOP500M. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Kepco BOP500M price
This Kepco BOP500M is listed at $3,100. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Kepco BOP500M calibration cost
NIST-traceable calibration for the Kepco BOP500M is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
