GE Fanuc / ICS ICS-554E-4-MN 4-Channel, 14-Bit, 105 MHz PMC ADC Board with Down-Converters and Xilinx FPGA
The ICS-554E-4-MN is a 4-channel, 14-bit, 105 MHz PMC ADC board from GE Fanuc / ICS. It features down-converters and a Xilinx FPGA for high-speed data acquisition and signal processing in demanding applications.
- Model
- GE Fanuc / ICS ICS-554E-4-MN
- Calibration
- Available on request
- Price
- $2,250
- Status
- In stock
- RFQ ref
- ICS-554E-4-MN
This unit
The GE Fanuc / ICS ICS-554E-4-MN is a 4-channel, 14-bit PMC ADC board delivering simultaneous sampling at up to 105 MHz per channel for high-speed signal acquisition and real-time processing. The module integrates four precision analog-to-digital converters with SNR exceeding 72 dB and SFDR greater than 85 dB, optional Graychip GC4016 quad digital down-converters for simultaneous processing of up to 16 arbitrary signal bands, and a user-programmable Xilinx FPGA with 3 million gates almost entirely available for custom signal processing logic.
Technical Specifications
ADC Channels: 4 channels, 14-bit resolution
Maximum Sampling Rate: 105 MHz per channel, simultaneous across all channels
Signal Quality: SNR >72 dB; SFDR >85 dB
Digital Down-Converters: Optional Graychip GC4016 quad DDCs supporting simultaneous down-conversion of up to 16 FDM signal bands
FPGA: Xilinx device with 3 million gates; nearly all gates available for user applications
Onboard Memory: 1 MByte total, organized as two independent 0.5 MByte FIFOs enabling simultaneous wideband and narrowband capture
Clock and Trigger: Internal or external sources supported; coherent sampling across single channels, multiple channels on same board, or multiple boards
PCI Interface: 64-bit, 66 MHz DMA; PCI 2.2 compatible
User I/O: 64 signals routed to FPGA; LVTTL standard with LVDS support
Key Features
Fast 64-bit DMA for efficient host data transfer
Dual FIFO architecture decouples wideband and narrowband processing streams
Coherent sampling capability simplifies phase-coherent multi-channel and multi-board systems
64 programmable I/O signals enable custom front-end and trigger logic
Typical Applications
Military communications and signal intelligence
3G/4G cellular base station development
Smart antenna systems and radar beam forming
Wireless test and measurement
Satellite ground stations
Compatibility & Integration The PMC form factor integrates with any carrier card supporting PMC modules, including VME, PCI, and CompactPCI platforms. External clock and trigger synchronization supports distributed multi-board deployments.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | DC to 105 MHz |
GE Fanuc / ICS ICS-554E-4-MN — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the GE Fanuc / ICS ICS-554E-4-MN. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
GE Fanuc / ICS ICS-554E-4-MN price
This GE Fanuc / ICS ICS-554E-4-MN is listed at $2,250. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
GE Fanuc / ICS ICS-554E-4-MN calibration cost
NIST-traceable calibration for the GE Fanuc / ICS ICS-554E-4-MN is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
