Anritsu MG3710E Vector Signal Generator – Vector Signal Generator
Anritsu Vector Signal Generators. Bandwidth: 160 MHz (120 MHz internal baseband generator), Accuracy: ±0.5 dB absolute.
- Model
- Anritsu MG3710E
- Calibration
- Available on request
- Price
- $26,000
- Status
- In stock
- RFQ ref
- MG3710E
This unit
The Anritsu MG3710E is a vector signal generator engineered to produce complex modulated signals across multiple frequency bands, delivering RF and baseband performance for R&D, manufacturing, and quality assurance environments. It consolidates functionality typically requiring multiple synchronized instruments, reducing system complexity and cost while supporting current and emerging wireless standards.
Technical Specifications Frequency Coverage
100 kHz to 2.7 GHz, 4.0 GHz, or 6.0 GHz (selectable)
Frequency converter options extend range to 44 GHz RF Performance
Output power: +23 dBm (CW, 400 MHz to 3 GHz)
Modulation bandwidth: 160 MHz (120 MHz internal baseband generator)
SSB phase noise: −140 dBc/Hz nominal @ 100 MHz (20 kHz offset); −131 dBc/Hz typical @ 1 GHz; −125 dBc/Hz typical @ 2 GHz
Level accuracy: ±0.5 dB absolute; ±0.2 dB linearity typical
ACLR: −68 dBc (W-CDMA Test Model 1, 64DPCH, ≤+5 dBm)
Switching speed: <600 µs (List/Sweep mode) Baseband & Memory
Built-in waveform generator: 20 kHz to 200 MHz sampling rate
Waveform memory: 64 Msamples standard; 256 Msamples or 1024 Msamples optional Modulation Support Digital: 5G NR (sub-6 GHz), LTE-Advanced, W-CDMA/HSPA, GSM/EDGE, CDMA2000, TD-SCDMA, WLAN (802.11a/b/g/n/j/p/ac), Bluetooth, GPS/GLONASS/QZSS, DVB-T/H, ISDB-T/BS/CS/CATV, broadcast patterns, fading, multi-carrier, TDMA, DFS radar and waveform patterns Analog: AM, FM, phase modulation; pulse modulation supported
Key Features
160 MHz modulation bandwidth accommodates 802.11ac when using MX370111A options
Fast frequency switching enables efficient list and sweep operations
Excellent phase noise performance across L-band and microwave frequencies
Large waveform memory supports extended signal sequences without reloading
Typical Applications
Cellular device and infrastructure testing (5G, LTE, W-CDMA)
WLAN and Bluetooth transceiver validation
Satellite navigation receiver characterization
Digital television and broadcast signal simulation
Multi-standard protocol development and verification
Compatibility & Integration Frequency conversion accessories enable operation beyond the native 6.0 GHz maximum. Standard RF output connects to external amplifiers and test fixtures for power scaling and integration into larger measurement systems.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 100 kHz to 2.7 GHz, 4.0 GHz, or 6.0 GHz (selectable) |
| up to 44 GHz with frequency converter options | Power Range (dBm) | '+23 dBm (CW, 400 MHz to 3 GHz) |
Anritsu MG3710E — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu MG3710E. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Anritsu MG3710E price
This Anritsu MG3710E is listed at $26,000. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu MG3710E calibration cost
NIST-traceable calibration for the Anritsu MG3710E is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
