Agilent / Keysight N5225A 50 GHz PNA Microwave Network Analyzer
Agilent / Keysight Network Analyzers. Frequency Range: 10 MHz to 50 GHz, Dynamic Range: 127 dB system, Channels: 200 independent measurement channels.
- Model
- Agilent / Keysight N5225A
- Calibration
- Available on request
- Price
- $106,574
- Status
- In stock
- RFQ ref
- N5225A
This unit
The Keysight N5225A is a 50 GHz PNA microwave network analyzer delivering S-parameter measurements across 10 MHz to 50 GHz. Built on the proven PNA Series platform, it combines exceptional measurement integrity with the speed and dynamic range required for demanding passive and active device characterization. The instrument achieves 127 dB system dynamic range and 0.003 dBrms trace noise, enabling precise measurements of filters, amplifiers, frequency converters, and complex multiport networks.
Technical Specifications
- Frequency Range: 10 MHz to 50 GHz
- Dynamic Range: 127 dB system; 132 dB receiver
- Trace Noise: 0.003 dBrms
- Noise Floor: −114 dBm at 10 Hz IF bandwidth
- Measurement Speed: 5.5 ms for 201 points, single sweep
- Maximum Points: 100,001 per trace
- Channels: 200 independent measurement channels
- IF Bandwidth: 15 MHz
- Output Power: +13 dBm
- Power Sweep Range: 38 dB
- Best Dynamic Accuracy: 0.1 dB compression at +12 dBm input power
- Harmonic Content: −60 dBc
- RF Connectors: 1.85 mm male
- Benchtop Dimensions: 24 × 20 × 16 in; 50 lbs
- Warm-up Requirement: 90 minutes for performance specifications (25 °C ±5 °C)
Key Features
- Two- or four-port configurations with built-in sources
- CW and pulsed S-parameter measurements
- Time and frequency domain analysis
- Noise figure, gain compression, and harmonic distortion measurements
- Conversion gain/loss and true differential stimulation capability
- Millimeter-wave, material, and signal integrity measurement support
- Antenna and balance measurement functionality
- Multilingual embedded online help
Typical Applications Component characterization, filter and duplexer testing, amplifier evaluation, frequency converter analysis, millimeter-wave device measurement, material characterization, and signal integrity validation.
Compatibility & Integration Part of the Keysight PNA Series family. Hardware and firmware upgrade paths exist from A-model to B-model configurations.
Agilent / Keysight N5225A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight N5225A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Agilent / Keysight N5225A price
This Agilent / Keysight N5225A is listed at $106,574.38. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight N5225A calibration cost
NIST-traceable calibration for the Agilent / Keysight N5225A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
