Amplifier Research 150A250 RF Amplifier, 100 kHz to 250 MHz
Amplifier Research 150A250 RF Amplifier, 100 kHz to 250 MHz,High-power RF amplifier operating between 100 kHz and 250 MHz. Provides 150W output for EMC testing, RF communication evaluation, and general-purpose RF amplification. Built for durability and consistent performance in demanding test setups.
- Model
- Amplifier Research 150A250
- Calibration
- Available on request
- Price
- $2,579
- Status
- In stock
- RFQ ref
- 150A250
This unit
The Amplifier Research 150A250 is a self-contained broadband RF amplifier engineered for laboratory and test environments requiring high instantaneous bandwidth, stable gain, and moderate power delivery. Built on push-pull MOSFET circuitry, it delivers 150 W minimum output across 100 kHz to 250 MHz while maintaining unconditional stability into any load impedance - no damage, no oscillation, no foldback protection needed. The amplifier accepts input signals as low as 1.0 mW for rated output and provides 52 dB minimum gain with ±1.5 dB flatness across its operating range.
Technical Specifications
- Frequency Range: 100 kHz to 250 MHz
- Output Power: 150 W minimum rated; 155 W minimum @ 3 dB compression; 120 W @ 1 dB compression
- Gain: 52 dB minimum with ±1.5 dB flatness
- Input Level for Rated Output: 1.0 mW maximum
- Input Impedance: 50 Ω, VSWR 1.5:1 maximum
- Mismatch Tolerance: 100% rated power into any load impedance without damage or oscillation
- Primary Power: 90–135/180–270 VAC auto-ranging, 47–63 Hz, single-phase
- Operating Temperature: 5°C to 40°C
- Humidity: 80% maximum up to 31°C, decreasing linearly to 50% at 40°C
- Altitude: Up to 2000 m
- Dimensions: 9.9 in (H) × 19.8 in (W) × 18.1 in (D)
- Weight: 70 lb
Key Features
- Push-pull MOSFET design minimizes distortion and ensures load-invariant operation
- Type-N (female) connectors for RF input and output
- Digital front-panel display for status and fault indication
- IEEE-488 (GPIB) and RS-232 remote control interfaces
- Integrated power supply with ±10% mains tolerance
Typical Applications
- RF susceptibility and EMC testing
- Antenna and RF component evaluation
- Watt meter calibration
- Driver amplifier for high-power systems
Compatibility & Integration IEEE-488 and RS-232 interfaces enable integration into automated test systems. The amplifier operates within standard laboratory environmental conditions and meets Pollution Degree 2 specifications.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 100 kHz to 250 MHz | Voltage / Current Range: 47–63 Hz, 90–135/180–270 VAC |
Amplifier Research 150A250 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Amplifier Research 150A250. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Amplifier Research 150A250 price
This Amplifier Research 150A250 is listed at $2,579. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Amplifier Research 150A250 calibration cost
NIST-traceable calibration for the Amplifier Research 150A250 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →