HP / Agilent 53150A 20 GHz CW Microwave Frequency Counter
The HP/Agilent 53150A is a CW microwave frequency counter that measures frequencies up to 20 GHz. It offers high resolution and accuracy for demanding frequency measurements. Ideal for telecommunications, radar, and satellite communication applications.
- Model
- HP / Agilent 53150A
- Calibration
- Available on request
- Price
- $2,894
- Status
- In stock
- RFQ ref
- 53150A
This unit
The HP/Agilent 53150A is a 20 GHz CW microwave frequency counter that combines high-resolution frequency measurement with simultaneous power acquisition through a single ultra-wideband input. Designed for telecommunications, radar, and satellite communications applications, it delivers 1 Hz resolution and 1 Hz to 1 MHz selectable measurement bandwidth. The instrument measures frequency on Channel 1 from 10 Hz to 125 MHz and on the microwave input from 50 MHz to 20 GHz, while simultaneously capturing power in dBm or Watts across the entire microwave band.
Technical Specifications Frequency Measurement
Channel 1: 10 Hz to 125 MHz
Channel 2 (Microwave): 50 MHz to 20 GHz
Maximum resolution: 1 Hz
Selectable resolution: 1 Hz to 1 MHz Power Measurement
Range: -20 dBm to +10 dBm (trigger level capability)
Display units: dBm or Watts
Analog peaking indicator for signal optimization Input Specifications
Channel 1: 40 mV rms (10-30 Hz); 25 mV rms (30 Hz–125 MHz); maximum 2 Vrms; 1 MΩ / 60 pF; BNC connector
Channel 2: 50 Ω impedance; SMA/APC-3.5 connector; SWR 1.5:1 (50–250 MHz), 2.0:1 (0.25–10 GHz) Performance
Acquisition time: 100–140 ms
Measurement time: 1/Resolution + 20 ms
Sample rates: Fast (20 ms), Medium (250 ms), Slow (1 s)
Accuracy: ±1 LSD ± residual stability ±(timebase error × frequency) Timebase Options
Standard timebase
Option 001: High Stability Oven Timebase
External reference: 1, 2, 5, 10 MHz
Key Features
Dual-channel architecture: low-frequency and microwave inputs
Cable loss compensation with 10 independent frequency points
Measurement averaging: 1–99 running average
Frequency and power offset for relative measurements
Trigger modes: Internal, External, Manual, or Bus
Typical Applications Telecommunications signal verification, radar frequency validation, satellite uplink/downlink measurements, and microwave component characterization.
Compatibility & Integration Fully programmable via GPIB (IEEE 488) and RS-232C interfaces. SCPI-compliant command set enables integration into automated test environments. Backlit LCD display; 4.4" H × 13.1" W × 14.6" D; 17.6 lbs.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | Channel 1: 10 Hz to 125 MHz |
| Channel 2 (Microwave) | 50 MHz to 20 GHz | Power Range (dBm): '-20 dBm to +10 dBm (trigger level) | Voltage / Current Range: Channel 1: 25–2000 mV rms |
HP / Agilent 53150A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the HP / Agilent 53150A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
HP / Agilent 53150A price
This HP / Agilent 53150A is listed at $2,894.38. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
HP / Agilent 53150A calibration cost
NIST-traceable calibration for the HP / Agilent 53150A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
