Anritsu 69085A Synthesized CW Generator, 0.5 – 60 GHz
Anritsu 69085A,"High-quality synthesized CW generator from 0.5 to 60 GHz. Suitable for development and manufacturing environments requiring stable signal output."
- Model
- Anritsu 69085A
- Calibration
- Available on request
- Price
- $33,470
- Status
- In stock
- RFQ ref
- 69085A
This unit
The Anritsu 69085A is a synthesized continuous wave (CW) generator delivering precision signal generation from 0.5 to 60 GHz. Built for development and manufacturing environments, It has the frequency stability and accuracy demanded by telecommunications, research, and electronics testing applications. The instrument combines a large high-resolution TFT color LCD with an intuitive interface, enabling straightforward operation across laboratory and field settings.
Technical Specifications
- Frequency Range: 0.5 GHz to 60 GHz
- Phase Noise: Ultra-low SSB phase noise characteristic of the 69A synthesizer family, reaching –100 dBc at 10 kHz offset from 10 GHz
- Spurious Signals: Low spurious performance
- Display: Large, high-resolution TFT color LCD
Key Features
- Full remote control via IEEE 488 GPIB with SCPI and Native mode command support
- USB, GPIB, and LAN connectivity for flexible integration
- Optional 0.1 Hz frequency resolution capability
- Durable construction rated for rigorous laboratory and field deployment
Typical Applications
- Telecommunications system development and validation
- Research and development signal sourcing
- Electronics and component testing
- Signal analysis and generation workflows
Compatibility & Integration The 69085A operates through multiple interfaces: USB for direct instrument control, GPIB (IEEE 488) for automated test environments, and LAN for remote laboratory integration. Both SCPI standard commands and Anritsu Native mode are fully supported, enabling seamless integration into existing test architectures and custom measurement systems.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 0.5 GHz to 60 GHz |
Anritsu 69085A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 69085A. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 69085A faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 69085A price
This Anritsu 69085A is listed at $33,470. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 69085A calibration cost
NIST-traceable calibration for the Anritsu 69085A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
