Anritsu 69359A Synthesized Sweep/Signal Generator, 0.01 – 26.5 GHz
Anritsu 69359A Synthesized Sweep/Signal Generator,Designed for precision RF applications, this model offers sweep and CW modes from 0.01 to 26.5 GHz. It delivers high spectral purity and stable output, making it suitable for advanced radar and communication testing environments.
- Model
- Anritsu 69359A
- Calibration
- Available on request
- Price
- $8,630
- Status
- In stock
- RFQ ref
- 69359A
This unit
The Anritsu 69359A is a synthesized sweep/signal generator delivering precision RF signal generation across 0.01 GHz to 26.5 GHz. Operating in both sweep and continuous wave modes, It has ultra-low phase noise and high spectral purity for demanding radar, communication, and advanced test environments. The instrument supports multiple modulation formats
AM, FM, and Pulse - with simultaneous synchronized modulation capability.
Its flexible sweep architecture accommodates alternate, analog, power, and step modes, with programmable frequency agility storing up to 1000 non-sequential frequencies under GPIB control.
Technical Specifications
- Frequency Range: 0.01 GHz to 26.5 GHz
- Output Power: Maximum 13 dBm; Minimum –125 dBm
- Phase Noise: SSB phase noise –105 dBc/Hz to –63 dBc/Hz
- Output Accuracy: ±2 dB
- Power Consumption: 190 VA minimum
- Sweep Modes: Alternate, Analog, Power, Step, Manual
- Step Sweep Range: 1 to 10,000 steps
- Sweep Width: 1 kHz to full range (0.1 Hz with Option 11)
- Dwell Time per Step: 1 ms to 99 seconds
- Frequency Switching Time: <15 ms + 1 ms/GHz step size or <40 ms maximum
- Programmable Frequencies: Up to 1,000 non-sequential addresses
Key Features
- AM, FM, and Pulse modulation with user-downloadable arbitrary waveforms
- Phase-locked step sweep across all frequency steps
- Master/slave operation capability
- User-level flatness correction and 360B SS Mode
- Self-test and secure mode functions
- Step size resolution from 1 kHz to full instrument range
Typical Applications
- Advanced radar system testing and validation
- Communication system characterization
- High-frequency component and subsystem evaluation
- Precision signal sourcing in demanding laboratory environments
Compatibility & Integration GPIB control interface with SCPI command support enables remote operation and integration into automated test systems. Master/slave configuration supports multi-instrument coordination.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 0.01 GHz to 26.5 GHz | Power Range (dBm): '-125 dBm to 13 dBm | Voltage / Current Range: 190 VA minimum |
Anritsu 69359A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 69359A. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 69359A faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 69359A price
This Anritsu 69359A is listed at $8,630. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 69359A calibration cost
NIST-traceable calibration for the Anritsu 69359A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
