Kontron CP3002 Intel Core i7 3U CompactPCI Board
Kontron Embedded Test Systems. Model: CP3002.
- Model
- Kontron CP3002
- Calibration
- Available on request
- Price
- $1,850
- Status
- In stock
- RFQ ref
- CP3002
This unit
The Kontron CP3002 is a 3U CompactPCI single board computer engineered for embedded applications in industrial, transportation, and defense environments. Built on the Mobile Intel QM57 Express Platform Controller Hub, it delivers Intel Core i7 processing with Turbo Boost and Hyper-Threading support, integrated graphics, and configurable memory up to 8 GB DDR3 with ECC. The board operates at 31W power consumption (2.0 GHz LV, 4HP version) and supports multiple storage options including onboard NAND Flash (up to 32 GB) and CFast or 2.5-inch SATA interfaces via extension modules.
Technical Specifications Processor Options
Intel Core i7-610E (up to 2.53 GHz)
Intel Core i7-620LE (2.0 GHz)
Intel Core i7-660UE (ULV)
Intel Celeron U3405 (ULV) or 1.07 GHz variants
Turbo Boost and Hyper-Threading enabled Memory & Storage
DDR3 SDRAM up to 8 GB at 1066 MHz with ECC support
Two SODIMM sockets (CP3002) or soldered memory (CP3002-RC/-RA)
Onboard SATA NAND Flash: 16 GB or 32 GB
CFast socket and 2.5-inch SATA HDD/SSD support via 8HP extension module Connectivity
2x Gigabit Ethernet (front panel); up to 4x GbE total
2x USB 2.0 (front); up to 6x USB 2.0 rear
1x VGA; 1x DVI (with mezzanine card)
Up to 6x SATA interfaces
Up to 2x COM ports (RS-232) plus onboard serial headers
GPIO support Form Factor
3U CompactPCI with PCI Passive and Peripheral Mode support
VITA 47 compliance (CP3002-RC/-RA) for temperature, shock, vibration
Key Features
Integrated graphics core with doubled 3D/video performance over previous platforms
Optional Trusted Platform Module (TPM) for enhanced security
Wake-On-LAN support
Reset button and status LEDs
Typical Applications Industrial automation, transportation systems, defense applications, and embedded deployments requiring extended I/O and thermal stability.
Compatibility & Integration Supported operating systems: Linux, VxWorks, Wind River Linux, Windows XP, Windows 7, Windows Embedded Standard 7, Windows Server 2003/2008, QNX. Board support packages available for each OS.
Kontron CP3002 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Kontron CP3002. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Kontron CP3002 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Kontron CP3002 price
This Kontron CP3002 is listed at $1,850. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Kontron CP3002 calibration cost
NIST-traceable calibration for the Kontron CP3002 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
