Keysight / Agilent / HP E1434A 4-Channel 65 kSa/sec Arbitrary Source (w/ Option ANC)

Keysight / Agilent / HP Arbitrary Waveform Generators. Bandwidth: configure as four 16-bit channels at 25.6 kHz band, Channels: 4 independent.

Model
Keysight / Agilent / HP E1434A
Calibration
Available on request
Price
$3,500
Status
In stock
RFQ ref
E1434A
View cart
Prefer to talk? Call +1 (484) 841-9341

This unit

The Keysight/Agilent/HP E1434A is a 4-channel arbitrary waveform source module for VXI-based test systems. This C-size, 1-slot module delivers flexible signal generation with selectable resolution and bandwidth: configure as four 16-bit channels at 25.6 kHz bandwidth or two 20-bit channels at 6.4 kHz bandwidth. It samples at up to 65 kSa/sec and outputs 1 Vpk with 1.2 kΩ output impedance.


The E1434A supports arbitrary waveforms (downloadable, glitch-free looping), sine waves (0 Hz to 25.6 kHz with independent frequency/phase/amplitude control per channel), and random noise (periodic or pseudo-random, band-translatable). Onboard DSP and 32 MB RAM (with Option ANC) enable continuous gapless data transfer over the VXI local bus, eliminating host bottlenecks in multi-channel systems. Amplitude flatness is ±1 dB typical (5 Hz to 20 kHz, scale factor 0.1 to 1.0).


Channel pairs are grouped - each pair must output the same waveform type but operates independently from the other pair.


Technical Specifications



  • Module Type: VXI Plug-in Module (C-size, 1-slot)

  • Channels: 4 independent, grouped in pairs

  • Sampling Rate: Up to 65 kSa/sec

  • Resolution/Bandwidth (software-selectable): 16-bit @ 25.6 kHz (all 4 channels) or 20-bit @ 6.4 kHz (2 channels)

  • Output Level: 1 Vpk

  • Output Impedance: 1.2 kΩ (typical)

  • Amplitude Flatness: ±1 dB typical (5 Hz–20 kHz, scale factor 0.1–1.0); +10, –7 dB typical (5 Hz–20 kHz, scale factor 0.01–1.0)

  • RAM: 32 MB (with Option ANC)


Key Features



  • Arbitrary waveforms with repeating-loop or continuous-concatenation playback

  • Sine wave generation: 0 Hz to 25.6 kHz, continuous or burst modes

  • Random noise generation: periodic, pseudo-random, and band-translatable

  • Onboard DSP and RAM for gapless data transfer over VXI local bus

  • Dual-resolution architecture for precision control across wide amplitude ranges


Typical Applications



  • Mechanical, acoustical, and electrical testing

  • Complex signal generation in demanding test environments

  • Multi-channel synchronized stimulus in VXI-based systems


Compatibility & Integration



  • VXI digitizers (E1432A, E1433A/B) integration via register-based VXI bus and local bus communication

Specifications

ParameterValue
Frequency Range0 Hz to 25.6 kHz | Voltage / Current Range: 1 Vpk output

Keysight / Agilent / HP E1434A — Repair & Calibration Service

Aumictech offers NIST-traceable calibration and repair for the Keysight / Agilent / HP E1434A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.

Standard Cal
$450
Pass/fail cert + NIST sticker
Cal with Data
$650
Full NIST cert with measured values

Keysight / Agilent / HP E1434A price

This Keysight / Agilent / HP E1434A is listed at $3,500. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.

Keysight / Agilent / HP E1434A calibration cost

NIST-traceable calibration for the Keysight / Agilent / HP E1434A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →

Documents