Adax HDCII-PMC High-Density Narrowband Channelized Protocol Controller
The Adax HDCII-PMC is a high-density narrowband channelized protocol controller designed for efficient data transmission. It supports a wide range of protocols and offers high-speed connectivity for demanding applications.
- Model
- Adax HDCII-PMC
- Calibration
- Available on request
- Price
- $750
- Status
- In stock
- RFQ ref
- HDCII-PMC
This unit
The Adax HDCII-PMC is a high-density narrowband channelized protocol controller delivered as a PCI Mezzanine Card. It handles efficient data transmission across wireline, wireless, and convergence platforms using a low-power on-board processor capable of thousands of transactions per second with minimal host CPU load.
Technical Specifications
Form Factor & Host Interface- PMC 3.3V 66/33MHz 32-bit interface
- Board dimensions: 14.9 cm × 7.4 cm Channel Density
- Up to 248 Low Speed Links (LSL) MTP2 links per card
- Up to 248 I-TDM flows per card
- Up to 8 High-Speed Links (HSL) per card, supporting Q.703 Annex A or 64 VCs of ATM AAL5
- Up to 128 Frame Relay channels
- Up to 248 combined channels of HDLC, X.25, LAPB/D/F/V5 Trunk Interfaces
- Up to 8 software-selectable T1/E1/J1 trunks per card
Key Features Protocol Support SS7 (MTP2 and ATM SS7), LAPB/D/V5, Frame Relay, X.25, HDLC, and Integrated Time Division Multiplexing (I-TDM) for traditional TDM SS7, high-speed ATM SS7, and voice interworking applications. Processing & Throughput On-board processor with minimal host load delivers high-capacity data throughput. Dynamically configurable channel allocation optimizes resource utilization for mixed protocol deployments. Software Portability Common software driver and unified API across PMC, AMC, PCI, and PCIe form factors. Single-driver architecture reduces development cycles and protects software investment across platform variants.
Typical Applications Traditional TDM signaling, high-speed ATM-based protocol stacks, voice interworking between legacy and modern network elements, Frame Relay and X.25 packet transport, multi-protocol convergence systems.
Compatibility & Integration Designed for scalable, flexible deployment across diverse system architectures. Form-factor independence via unified API enables rapid porting between embedded, modular, and standard computing platforms without application rewrite.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 3.3V |
Adax HDCII-PMC — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Adax HDCII-PMC. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Adax HDCII-PMC faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Adax HDCII-PMC price
This Adax HDCII-PMC is listed at $750. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Adax HDCII-PMC calibration cost
NIST-traceable calibration for the Adax HDCII-PMC is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
