Agilent/Keysight J2298B
Agilent / Keysight Embedded Test Systems.
- Model
- Agilent / Keysight J2298B
- Calibration
- Available on request
- Price
- $2,512
- Status
- In stock
- RFQ ref
- J2298B
This unit
The Agilent/Keysight J2298B is an interface module for ISDN Primary Rate Interface (PRI) T1 signaling, designed to generate, simulate, and monitor ISDN PRI signals on T1 lines. This module integrates into Keysight test equipment chassis to enable comprehensive T1/ISDN PRI network analysis, protocol troubleshooting, and equipment validation across research, development, and manufacturing environments.
Technical Specifications
The J2298B interfaces directly with T1 digital transmission lines operating at 1.544 Mbps. The module connects to host test instruments via dedicated module interface slots within compatible Keysight chassis platforms. Specific electrical characteristics including impedance, bandwidth, and power consumption are determined by host system configuration.Key Features
- T1 interface for ISDN PRI signal generation and observation
- Direct connection to T1 digital transmission lines at 1.544 Mbps
- Integration with Keysight network analysis and test equipment families
- Module-based architecture for chassis integration
- Supports both live traffic monitoring and simulated network conditions
Typical Applications
- Network simulation and T1/ISDN PRI condition testing
- Live traffic monitoring and performance analysis on ISDN PRI networks
- Protocol analysis through T1/ISDN PRI data capture and evaluation
- Equipment validation in R&D and manufacturing test environments
- Troubleshooting and behavior verification of T1-dependent network devices
Compatibility & Integration The J2298B is engineered for integration into Keysight test platforms supporting ISDN PRI T1 testing. Host systems must provide compatible module slots and appropriate software support for PRI functionality. Consult your system documentation to verify slot availability and driver support.
Agilent / Keysight J2298B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight J2298B. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Agilent / Keysight J2298B faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Agilent / Keysight J2298B price
This Agilent / Keysight J2298B is listed at $2,512. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight J2298B calibration cost
NIST-traceable calibration for the Agilent / Keysight J2298B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
