Abaco Systems PCIE-5565PIORC-200A00 PCI Express (PCIe) Reflective Memory (RFM) Node Interface Card
PCI Express (PCIe) Reflective Memory (RFM) Node Interface Card
- Model
- Abaco Systems PCIE-5565PIORC-200A00
- Calibration
- Available on request
- Price
- $7,560
- Status
- In stock
- RFQ ref
- PCIE-5565PIORC-200A00
This unit
The Abaco Systems PCIE-5565PIORC-200A00 is a low-profile PCI Express Reflective Memory (RFM) node interface card that enables deterministic, software-transparent data sharing across up to 256 independent nodes. Data written to one node's memory automatically mirrors to all other nodes on the network via fiber-optic links, supporting transfer rates from 43 Mbyte/s (4-byte packets) to 170 Mbyte/s (64-byte packets) in non-redundant mode. Redundant transfer mode delivers 20 Mbyte/s to 87 Mbyte/s with enhanced error suppression.
The card integrates x4 Lane PCI Express 1.0a connectivity with one independent DMA channel, field-upgradeable firmware, and configurable 128 Mbyte or 256 Mbyte onboard SDRAM.
Technical Specifications
- Form Factor: Low-profile PCI Express
- PCI Interface: x4 Lane PCI Express 1.0a to PCI Bridge
- PCI Express Signaling: 2.5 GHz
- DMA Channels: One independent channel
- Onboard SDRAM: 128 Mbyte or 256 Mbyte (configurable)
- Packet Size: 4 to 64 bytes (dynamic)
- Fiber Optic Network Speed: 2.12 Gbaud serially
- Data Transfer Rate (Non-Redundant): 43 Mbyte/s to 170 Mbyte/s
- Data Transfer Rate (Redundant): 20 Mbyte/s to 87 Mbyte/s
- Maximum Nodes: 256
- Dimensions: 6.6 inches × 2.713 inches
- Weight: 0.2 lbs
- Operating Temperature: 0°C to +65°C (with forced air cooling)
- Cooling: 300 LFM
- Compliance: RoHS
Key Features
- Multimode fiber support up to 300 meters; single-mode fiber to 10 kilometers
- Any node can generate interrupts to any other node or all nodes with a single command.
- Error detection with redundant transfer mode option.
- Field-upgradeable firmware.
- Software transparent operation minimizes host processor overhead.
Typical Applications
- Aircraft simulators
- Ship and submarine simulators
- Industrial control systems
- Automated testing systems
- Power plant simulators
- Engine test facilities
- Aluminum rolling mills
Compatibility & Integration Supports Linux, VxWorks, and Windows. Bus structure independence allows integration of diverse hardware platforms and operating systems into a single shared-memory network.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 2.5 GHz (PCI Express signaling) |
Abaco Systems PCIE-5565PIORC-200A00 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Abaco Systems PCIE-5565PIORC-200A00. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Abaco Systems PCIE-5565PIORC-200A00 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Abaco Systems PCIE-5565PIORC-200A00 price
This Abaco Systems PCIE-5565PIORC-200A00 is listed at $7,560. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Abaco Systems PCIE-5565PIORC-200A00 calibration cost
NIST-traceable calibration for the Abaco Systems PCIE-5565PIORC-200A00 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
