JDS Uniphase MAP-AC990
JDS Uniphase Embedded Test Systems. Voltage: 100–125 V AC or 200–240 V AC.
- Model
- JDS Uniphase MAP-AC990
- Calibration
- Available on request
- Price
- $45
- Status
- In stock
- RFQ ref
- MAP-AC990
This unit
The JDS Uniphase MAP-AC990 is a modular instrumentation cassette designed for integration within the Multiple Application Platform (MAP) system, delivering optical test and measurement capabilities through a flexible, hot-swappable architecture. As a component of the MAP ecosystem, it operates within a common backplane infrastructure supporting over 15 different cassette types, configure custom test solutions without system power-down or performance interruption.
Technical Specifications Power Requirements
Input voltage: 100–125 V AC or 200–240 V AC
Frequency: 50/60 Hz
Power consumption: 200 VA Communication Interfaces
RS-232 serial interface
GPIB (IEEE 488) interface
Remote communication ports for supervisory control
Key Features
Hot-swappable cassette design - remove and replace modules without powering down the MAP chassis
Automatic cassette identification via MAP firmware and console software
Compatible with MAP+2M00 (19-inch 8-slot Master) and MAP+2B00 (9.5-inch 3-slot Benchtop) chassis configurations
Reversible chassis architecture supporting front and rear optical access
Integrates with MAP Console software for centralized system control and configuration
Typical Applications Within the MAP platform ecosystem, cassette modules address optical signal generation, amplification, attenuation, and routing functions across telecom and datacom wavelengths. The MAP-AC990 contributes to performance characterization workflows including link validation, component testing, and optical network diagnostics.
Compatibility & Integration The MAP-AC990 operates on the common MAP backplane and maintains compatibility with all standard MAP chassis configurations. Optional rackmount kit MAP+2A03 enables integration into 19-inch rack infrastructure. Control via RS-232 or GPIB allows integration into automated test frameworks and remote laboratory environments. The modular design eliminates downtime during instrument reconfiguration - simply exchange cassettes to adapt system function to evolving test requirements.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 100–125 V AC or 200–240 V AC at 50/60 Hz |
JDS Uniphase MAP-AC990 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDS Uniphase MAP-AC990. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common JDS Uniphase MAP-AC990 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
JDS Uniphase MAP-AC990 price
This JDS Uniphase MAP-AC990 is listed at $45. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDS Uniphase MAP-AC990 calibration cost
NIST-traceable calibration for the JDS Uniphase MAP-AC990 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
