IFR Aeroflex PN9000 Phase Noise Measurement System
IFR Aeroflex Phase Noise Analyzers. Resolution: 0.01 Hz from carrier, Accuracy: ±2 dB to 1 MHz offset.
- Model
- IFR Aeroflex PN9000
- Calibration
- Available on request
- Price
- $15,979
- Status
- In stock
- RFQ ref
- PN9000
This unit
The IFR Aeroflex PN9000 Phase Noise Measurement System characterizes spectral purity across a broad frequency spectrum. This modular platform measures phase noise, jitter, frequency stability, and amplitude noise in oscillators, synthesizers, and frequency sources. The base system spans 2 MHz to 1.8 GHz, with optional modules extending capability to 140 GHz.
Technical Specifications
Frequency Coverage- Base system: 2 MHz to 1.8 GHz
- Internal phase detectors: Up to 40 GHz (PN9000B) and 50 GHz (PN9000)
- Microwave down-converters: 2 to 18 GHz and higher with external harmonic mixers
- Extended configurations: Up to 140 GHz with specific module combinations Measurement Performance
- Close-to-carrier resolution: 0.01 Hz from carrier
- Offset analysis range: 0.01 Hz to 1 MHz (optional 40 MHz and 500 MHz ranges)
- Measurement accuracy: ±2 dB to 1 MHz offset; ±3 dB above 1 MHz
- Residual noise floor: −178 dBc/Hz
- Nominal RF input level: +6 dBm to +16 dBm
Key Features
- Phase Lock Loop, Delay Line, Added Phase Noise, Amplitude Noise, Frequency Stability, and Pulsed measurement modes
- Distinguishes Phase Modulation (PM) and Amplitude Modulation (AM) noise separately
- Plug-in optional modules for expanded range and specialized measurements
- Low Noise Amplifier with auto-gain optimization
- WPN9000 Windows-based software with graphical interface and file management
- Automatic performance adjustments for dynamic range optimization
Optional Modules & Accessories
- Low Noise DC/FM Reference Synthesizer (PN9100): 2 MHz to 4.5/18 GHz
- Microwave Down-converters (PN925X, PN927X, PN924X) for free-running sources
- Delay Lines (20 ns and 100 ns): 250 MHz to 2 GHz
- Added Noise Measurement (PN9841): 2 to 18 GHz for amplifiers and radar systems
- Frequency Doubler Isolator (PN9908)
- Reference Crystal Oscillators (PN95XX series) and SAW Oscillator (PN9562, 1 GHz)
- Pulse Generator and Modulator (PN9815)
- Buffer Amplifier Isolator (PN9820)
Typical Applications Phase noise characterization in research, development, and production environments. Ideal for validating frequency stability in oscillators, synthesizers, and microwave/RF signal sources.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 140 GHz with external mixers), 2 MHz to 140 GHz (base 2 MHz to 1.8 GHz |
| extended with modules to 50 GHz internal | Power Range (dBm) | '+6 dBm to +16 dBm (nominal RF input) |
IFR Aeroflex PN9000 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the IFR Aeroflex PN9000. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
IFR Aeroflex PN9000 price
This IFR Aeroflex PN9000 is listed at $15,979. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
IFR Aeroflex PN9000 calibration cost
NIST-traceable calibration for the IFR Aeroflex PN9000 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
