Rohde & Schwarz SMT03 5kHz to 3GHz Signal Generator
Rohde & Schwarz RF Signal Sources. Frequency Range: 5 kHz to 3 GHz, Resolution: 0.1 Hz, Accuracy: ±1.5 dB.
- Model
- Rohde & Schwarz SMT03
- Calibration
- Available on request
- Price
- $1,970
- Status
- In stock
- RFQ ref
- SMT03
This unit
The Rohde & Schwarz SMT03 is a benchtop RF signal generator spanning 5 kHz to 3 GHz, engineered for receiver development, production, and repair workflows as well as electromagnetic susceptibility testing. It delivers high signal quality with output levels from -144 dBm to +13 dBm and exceptional frequency resolution of 0.1 Hz. The instrument combines low phase noise, precise level accuracy, and flexible modulation capabilities - including AM, FM, and phase modulation with optional pulse and specialized generator modules.
Programmable sweep functions, external level correction, and multiple interface options (IEEE 488, RS-232, SCPI 1993.0) enable integration into automated test systems. Field-upgradeable architecture supports VOR/ILS generation, stereo FM measurement, and advanced pulse generation through optional modules.
Technical Specifications
- Frequency Range: 5 kHz to 3 GHz
- Frequency Resolution: 0.1 Hz
- Output Level Range: -144 dBm to +13 dBm (up to +16 dBm in limited range)
- Output Level Accuracy: ±1.5 dB; ±2 dB for frequencies above 3 GHz
- Timebase Stability: 0.000001 /yr
- Frequency Switching Time: 25 ms
- SSB Phase Noise: -109 dBc/Hz (typical -116 dBc/Hz at 20 kHz offset, 1 GHz)
- Programmable Interface Phase Noise: -120 dBc/Hz
- RF Leakage: 50 dB separation and >76 dB unweighted S/N ratio
- Optional pulse generator and modulator (20 ns to 1 s pulse width, up to 10 MHz pulse frequency, >80 dB on/off ratio)
Typical Applications
- Radio equipment development and manufacturing
- Receiver characterization and production testing
- Electromagnetic susceptibility (EMS) measurements
- FM broadcast transmitter and receiver verification
- Avionics navigation system testing (VOR/ILS option)
Compatibility & Integration
- Remote control via IEEE 488 (IEC 625) and RS-232
- SCPI 1993.0 command set for standardized instrument control
- Large backlit LCD display
- Optional rear panel RF and LF connectors (SMT-B19)
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 5 kHz to 3 GHz | Power Range (dBm): '-144 dBm to +13 dBm | Voltage / Current Range: 47–440 Hz (300 VA), 90–132 V / 180–265 V AC |
Rohde & Schwarz SMT03 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Rohde & Schwarz SMT03. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Rohde & Schwarz SMT03 faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Rohde & Schwarz SMT03 price
This Rohde & Schwarz SMT03 is listed at $1,970. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Rohde & Schwarz SMT03 calibration cost
NIST-traceable calibration for the Rohde & Schwarz SMT03 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
