Siemens pureform DCF UDCMC60LL Dispersion Compensation -1028.00 ps/nm
Siemens Optical Attenuators. Model: UDCMC60LL.
- Model
- Siemens UDCMC60LL
- Calibration
- Available on request
- Price
- $1,130
- Status
- In stock
- RFQ ref
- UDCMC60LL
This unit
The Siemens pureform DCF UDCMC60LL is a Dispersion Compensation Module (DCM) engineered to counteract chromatic dispersion in high-speed optical transmission systems. Operating with a compensation value of -1028.00 ps/nm, this single-mode fiber module introduces negative dispersion to offset pulse broadening accumulated in standard G.652 fibers. The device maintains signal integrity across long-haul and DWDM networks operating at 2.5 Gbps, 10 Gbps, and higher data rates.
Technical Specifications
- Dispersion Compensation Value: −1028.00 ps/nm
- Fiber Type: Single-Mode Fiber (SMF)
- Slope Compensation: 100% G.652 fiber C-Band slope compensation
- Insertion Loss: Low - critical for signal power budgets
- Polarization Mode Dispersion (PMD): Low performance for high-speed signal stability
- Operating Temperature: 0°C to 50°C
- Storage Temperature: −40°C to 85°C
- Humidity: 85% relative humidity maximum, non-condensing
Key Features
- Negative dispersion architecture counteracts positive dispersion in G.652 fiber
- Full slope compensation across C-Band wavelengths
- Minimal insertion loss preserves signal power budgets
- Low PMD characteristics support high-speed protocols
- Telcordia GR-2854-CORE and GR-1221-CORE compliant
Typical Applications
- Long-haul optical transmission networks
- Dense Wavelength Division Multiplexing (DWDM) systems
- High-speed transmission protocols (2.5 Gbps, 10 Gbps+)
- Chromatic dispersion compensation in fiber optic links
Compatibility & Integration
- Designed for single-mode fiber (G.652) systems
- Integrates into DWDM network architectures
- Compatible with modular chassis deployment (Fiber Driver™ platform)
- Delivers broadband low residual dispersion performance
Siemens UDCMC60LL — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Siemens UDCMC60LL. Calibration covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Siemens UDCMC60LL faults: motor and gear mechanism wear (attenuation steps or loss of smooth control), optical port contamination, EEPROM calibration data corruption. Most common faults are motor or gear mechanism wear on variable attenuators causing attenuation steps or loss of smooth control, optical port contamination reducing dynamic range, and EEPROM calibration data corruption on digitally controlled models.
Siemens UDCMC60LL price
This Siemens UDCMC60LL is listed at $1,130. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Siemens UDCMC60LL calibration cost
NIST-traceable calibration for the Siemens UDCMC60LL is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers attenuation accuracy at 5 or more set values across the full range (0 to rated maximum dB), attenuation linearity, wavelength-dependent attenuation at 1310 nm, 1490 nm, and 1550 nm, insertion loss at minimum attenuation (0 dB position), and polarization-dependent loss (PDL) where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
