Fluke 87V-MAX/E2 KIT Industrial Electrician Combo Kit, 1000 V, 10 A
The Fluke 87V MAX True-rms Digital Multimeter delivers accurate measurements and reliable performance. This combo kit includes the 87V MAX multimeter, TL175 TwistGuard test leads, AC175 alligator clips, and a ToolPak magnetic meter hanger. The Fluke 87V MAX operates up to 1000 V AC/DC and 10 A AC/DC. It is designed to withstand harsh environments and is ideal for industrial electricians.
- Model
- Fluke 87V-MAX/E2 KIT
- Calibration
- Available on request
- Price
- $690
- Status
- In stock
- RFQ ref
- 87V-MAX/E2 KIT
This unit
The Fluke 87V-MAX/E2 KIT Industrial Electrician Combo Kit delivers field-proven measurement capability and durability for industrial electrical troubleshooting. Built around the Fluke 87V MAX True-rms Digital Multimeter, this kit combines a rugged platform rated IP67 with accessory support for enhanced field efficiency and safety. The meter survives 4 meter drops and operates across -40°C to 55°C, making it suitable for demanding industrial environments.
Technical Specifications Measurement Range & Accuracy
AC/DC Voltage: 0–1000 V
AC/DC Current: 0–10 A (20 A for 30 seconds)
Resistance: 0–50 MΩ
Capacitance: 0–10,000 µF
Frequency: 0–200 kHz
Temperature: Thermocouple input (with supplied probe)
Display: 19,999 or 20,000 count resolution
True-rms AC measurement with extended bandwidth (15 Hz to 20 kHz) Environmental & Physical
IP67 rating: complete dust and water ingress protection
Drop survival: 4 meters (13 feet)
Operating temperature: -40°C to 55°C (-40°C operation limited to 20 minutes)
Dimensions: 2.4 × 4.3 × 8.5 inches with holster (60 × 101 × 215 mm)
Weight: 1.54 lbs with holster (698.5 g)
Power: Three AA batteries, 800 hour runtime Safety Ratings
CAT IV 600 V, CAT III 1000 V
Overvoltage protection: 8,000 V spike withstand
Key Features
Low-pass filter for voltage frequency measurement on variable frequency drives and electrically noisy circuits
Min/Max/Average recording with 250 µs peak capture for transient detection
Dual-level bright white backlight with illuminated keypad
Audible Input Alert guards against incorrect jack selection
Touch Hold for signal stabilization on noisy measurements
Relative mode zeroes test lead resistance in low-ohms applications
Removable holster integrates test lead storage and field carry
Included TL175 TwistGuard test leads, AC175 alligator clips, and ToolPak magnetic hanger
Typical Applications Industrial electrical troubleshooting, motor and drive diagnostics, control circuit verification, power distribution maintenance, and field service in wet, dusty, or corrosive environments.
Compatibility & Integration Kit includes TL175 TwistGuard test leads, AC175 alligator clips, and ToolPak magnetic meter hanger for integrated field deployment.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 15 Hz to 200 kHz | Voltage / Current Range: 0–10 A (20 A for 30 seconds), 0–1000 V |
Fluke 87V-MAX/E2 KIT — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Fluke 87V-MAX/E2 KIT. Calibration covers DC voltage accuracy at all ranges, AC voltage (True RMS) accuracy at 50 Hz, 1 kHz, and 10 kHz, DC current accuracy, resistance accuracy at all decade ranges, frequency accuracy, and diode test voltage. Fluke 87V and 289 also include capacitance and temperature calibration.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Fluke 87V-MAX/E2 KIT faults: blown input fuse, worn input jacks, display segment failure, relay contact wear on bench DMMs. Common faults include worn input jacks (banana socket contact wear on the mA and COM terminals), blown input fuses (especially the 440 mA HRC fuse), and display segment failures. Keithley 2000/2001/2002 bench DMMs commonly develop relay contact wear affecting resistance accuracy after extended service.
Fluke 87V-MAX/E2 KIT price
This Fluke 87V-MAX/E2 KIT is listed at $690. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Fluke 87V-MAX/E2 KIT calibration cost
NIST-traceable calibration for the Fluke 87V-MAX/E2 KIT is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers DC voltage accuracy at all ranges, AC voltage (True RMS) accuracy at 50 Hz, 1 kHz, and 10 kHz, DC current accuracy, resistance accuracy at all decade ranges, frequency accuracy, and diode test voltage. Fluke 87V and 289 also include capacitance and temperature calibration.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
