JDS Uniphase MAPB+1E1550FA1
JDS Uniphase Optical Amplifiers. Wavelength: ** 1550 nm.
- Model
- JDS Uniphase MAPB+1E1550FA1
- Calibration
- Available on request
- Price
- $1,850
- Status
- In stock
- RFQ ref
- MAPB+1E1550FA1
This unit
The JDS Uniphase MAPB+1E1550FA1 is an optical amplifier cassette module engineered for the JDS Uniphase MAP system platform. Operating at 1550 nm, this EDFA-based module delivers optical gain essential for signal boosting in DWDM systems and extending optical network reach. The module installs as a hot-swappable cassette within either MAP Master or MAP Benchtop chassis, enabling flexible test and measurement configurations without system downtime.
Technical Specifications
Product Line: JDS Uniphase MAP Series
Module Type: Optical Amplifier (EDFA configuration)
Wavelength: 1550 nm
Saturated Output Power: 14 dBm to 21 dBm typical
Noise Figure: As low as 3.3 dB
Gain Flatness: Better than 1.4 dB
Band: C-band or L-band operation available
Key Features
Hot-swappable cassette architecture eliminates need for system shutdown during module changes
Automatic cassette identification via MAP chassis firmware
Reversible front/rear optical access accommodates varied deployment configurations
Available in multiple optical connector types (FC/PC, FC/APC, SC/PC, SC/APC) for system compatibility
Proprietary backplane interface integrates directly with MAP chassis control electronics
Typical Applications
DWDM system signal boosting and regeneration
Optical network reach extension
Laboratory and field testing of fiber-optic systems
Signal power optimization in long-haul transmission links
Compatibility & Integration The MAPB+1E1550FA1 integrates into JDS Uniphase MAP Master (19-inch rackmount, 8-slot capacity) and MAP Benchtop (9.5-inch format, 3-slot capacity) chassis. Both platforms feature color displays, dynamic MAP firmware, and remote communication via RS-232 and GPIB interfaces. Power and control functions are managed entirely by the parent MAP chassis.
Specifications
| Parameter | Value |
|---|---|
| Power Range (dBm) | 14 dBm to 21 dBm (saturated output power typical) | Wavelength Range: 1550 nm |
JDS Uniphase MAPB+1E1550FA1 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDS Uniphase MAPB+1E1550FA1. Calibration covers gain at rated input power across the specified wavelength range, noise figure at rated gain setting, output power accuracy, gain flatness across the C-band or specified wavelength range, and polarization-dependent gain (PDG) where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common JDS Uniphase MAPB+1E1550FA1 faults: pump laser diode degradation (gain drop, reduced output power), TEC failure causing thermal drift, optical isolator degradation, power supply failure. The most common failure on any EDFA is pump laser diode degradation. Secondary faults include TEC failure causing thermal runaway, optical isolator degradation, and power supply failure.
JDS Uniphase MAPB+1E1550FA1 price
This JDS Uniphase MAPB+1E1550FA1 is listed at $1,850. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDS Uniphase MAPB+1E1550FA1 calibration cost
NIST-traceable calibration for the JDS Uniphase MAPB+1E1550FA1 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers gain at rated input power across the specified wavelength range, noise figure at rated gain setting, output power accuracy, gain flatness across the C-band or specified wavelength range, and polarization-dependent gain (PDG) where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
