JDS Uniphase OAB1594-20FP0
JDS Uniphase Optical Amplifiers. Model: OAB1594-20FP0.
- Model
- JDS Uniphase OAB1594-20FP0
- Calibration
- Available on request
- Price
- $6,800
- Status
- In stock
- RFQ ref
- OAB1594-20FP0
This unit
The JDS Uniphase OAB1594-20FP0 is an erbium-doped fiber amplifier (EDFA) from the OAB Series, engineered for optical communication systems across the C+L-band. Operating between 1530–1560 nm, this unit supports pre-amplifier, booster, and in-line amplifier configurations. It accommodates single-channel and multichannel DWDM signals, delivering saturated output power to 20 dBm in booster mode while maintaining noise figures as low as 3.3 dB in pre-amplifier configurations. The compact, benchtop or rack-mountable design includes user-accessible optical interfaces and front-panel controls with an LCD display for real-time monitoring of input/output power and current settings.
Technical Specifications
Product Type: Erbium-Doped Fiber Amplifier (EDFA)
Series: OAB Series
Operating Wavelength Range: 1530–1560 nm (C+L-band)
Amplifier Type Configurations: Pre-amplifier, Booster, In-line amplifier
Input Signal Support: Single-channel and multichannel (DWDM)
Saturated Output Power (Booster): Minimum 20 dBm
Noise Figure (Pre-amplifier): Minimum 3.3 dB
Noise Figure (Booster): Maximum 5 dB
Small Signal Gain (Booster): Approximately 37 dB
Operating Temperature: 0 to 50 °C
Storage Temperature: −40 to 70 °C
Humidity: Maximum 95% RH non-condensing (0 to 45 °C)
Specifications Guaranteed at: 1550 nm and 1590 nm, 23 °C
Key Features
Optical interface accessible from front panel
LCD display with input/output power and current monitoring
User-friendly front-panel control architecture
Compact benchtop or rack-mountable configuration
Typical Applications
Long-haul optical transmission systems
DWDM multichannel amplification
Signal pre-amplification and power boosting in telecommunications networks
Compatibility & Integration The OAB1594-20FP0 integrates with standard optical networking equipment and supports full-band tunable laser systems within the C and L bands. Its design ensures reliable operation across diverse telecommunications infrastructure.
Specifications
| Parameter | Value |
|---|---|
| Power Range (dBm) | '+20 dBm | Wavelength Range: 1530–1560 nm |
JDS Uniphase OAB1594-20FP0 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the JDS Uniphase OAB1594-20FP0. Calibration covers gain at rated input power across the specified wavelength range, noise figure at rated gain setting, output power accuracy, gain flatness across the C-band or specified wavelength range, and polarization-dependent gain (PDG) where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common JDS Uniphase OAB1594-20FP0 faults: pump laser diode degradation (gain drop, reduced output power), TEC failure causing thermal drift, optical isolator degradation, power supply failure. The most common failure on any EDFA is pump laser diode degradation. Secondary faults include TEC failure causing thermal runaway, optical isolator degradation, and power supply failure.
JDS Uniphase OAB1594-20FP0 price
This JDS Uniphase OAB1594-20FP0 is listed at $6,800. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
JDS Uniphase OAB1594-20FP0 calibration cost
NIST-traceable calibration for the JDS Uniphase OAB1594-20FP0 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers gain at rated input power across the specified wavelength range, noise figure at rated gain setting, output power accuracy, gain flatness across the C-band or specified wavelength range, and polarization-dependent gain (PDG) where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
