Keopsys / Optocom Innovation 30dbm
High-power optical amplifier module delivering 30dBm output. Ideal for boosting optical signals in various applications.
- Model
- Keopsys/Optocom Innovation 30dbm
- Calibration
- Available on request
- Price
- $3,200
- Status
- In stock
- RFQ ref
- 30dbm
This unit
The Keopsys / Optocom Innovation 30dBm is a high-power optical amplifier module engineered to amplify C-band signals across telecom and OEM applications. Delivering 19 dBm nominal output power with input signals ranging from -45 dBm to 0 dBm, this module combines low noise performance with precise power control and excellent long-term stability.
Technical Specifications
Optical Performance- Output Power: 19 dBm nominal (at Pin = -6 dBm)
- Input Power Range: -45 dBm to 0 dBm
- Operating Wavelength: 1530–1565 nm (C-band)
- Noise Figure: ≤ 4.5 dB maximum (Pin = -10 dBm)
- Gain Flatness: < 1.5 dB (Pin = -15 dBm)
- Stability (APC Pw): ≤ 1% rms maximum over 8 hours at 25°C Electrical & Environmental
- Supply Voltage: 5 V DC
- Power Consumption: < 4.5 W
- Operating Temperature: -20°C to +65°C
- Storage Temperature: -40°C to +85°C
- Warm-up Time: < 10 minutes
- FIT Rate: < 500
Key Features
- Three independent control modes: ACC (Automatic Current Control), APC (Automatic Power Control), and APPC (Automatic Pump Power Control)
- Output power tunability from 30% to 100% in APC mode
- Output monitoring capability for real-time power verification
- RS232 control interface for system integration
- Compact form factor: 150 × 120 × 18 mm, weighing less than 0.5 kg
- Multiple optical connector options: FC/APC, SC/APC, FC/SPC, SC/SPC
- Standard SMF28 pigtail with 0.75 m length and 900 µm jacketing (PVC)
Typical Applications
- Long-haul and metro optical transmission systems
- OEM optical subsystem integration
- C-band signal amplification in fiber optic networks
- Systems requiring low power consumption and high reliability
Compatibility & Integration Designed as an OEM module, this amplifier integrates into larger fiber optic systems. Standard C-band operation, configurable optical connectors, and RS232 control compatibility enable deployment across diverse telecom and test equipment platforms.
Keopsys/Optocom Innovation 30dbm — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Keopsys/Optocom Innovation 30dbm. Calibration covers gain at rated input power across the specified wavelength range, noise figure at rated gain setting, output power accuracy, gain flatness across the C-band or specified wavelength range, and polarization-dependent gain (PDG) where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Keopsys/Optocom Innovation 30dbm faults: pump laser diode degradation (gain drop, reduced output power), TEC failure causing thermal drift, optical isolator degradation, power supply failure. The most common failure on any EDFA is pump laser diode degradation. Secondary faults include TEC failure causing thermal runaway, optical isolator degradation, and power supply failure.
Keopsys/Optocom Innovation 30dbm price
This Keopsys/Optocom Innovation 30dbm is listed at $3,200. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Keopsys/Optocom Innovation 30dbm calibration cost
NIST-traceable calibration for the Keopsys/Optocom Innovation 30dbm is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers gain at rated input power across the specified wavelength range, noise figure at rated gain setting, output power accuracy, gain flatness across the C-band or specified wavelength range, and polarization-dependent gain (PDG) where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
