Agilent/Keysight U9405A
Agilent / Keysight Embedded Test Systems.
- Model
- Agilent / Keysight U9405A
- Calibration
- Available on request
- Price
- $2,400
- Status
- In stock
- RFQ ref
- U9405A
This unit
The Keysight U9405A is a compact in-circuit test (ICT) system for PCBA manufacturing, delivering the smallest inline automated footprint at 850 mm width. This Medalist i1000D platform supports both offline and inline configurations on a single hardware base, enabling efficient test program reuse and fixture investment protection across deployment modes. The U9405A accommodates PCBs from 50 mm × 50 mm to 430 mm × 300 mm with thickness ranging from 0.5 mm to 4.0 mm, and provides up to 1664 nodes or 512 nodes in Mini ICT specification.
Technical Specifications
- Node Capacity: 1664 nodes standard; 512 nodes (Mini ICT)
- Footprint: 850 mm width (smallest inline automated ICT)
- PCB Dimensions: 50–430 mm × 50–300 mm
- PCB Thickness: 0.5–4.0 mm
- Component Clearance: 100 mm top; 40 mm bottom
- Guide Holes: 2–4 mm diameter, minimum 10 mm from center
- Fixture Actuation: Press down with automatic engagement
- Conveyor Belt Width: 3.0 mm
- Conveyor Height: 895–1,000 mm
- Board Markers: Up to 7
- Power Supply: 200–240 V AC, 50/60 Hz
- Air Pressure: 6–8 kg/cm²
- Conveying Direction: Left to right or right to left
Key Features
- Boundary Scan, Cover-Extend Technology (CET), and Vectorless Test Extended Performance (VTEP 2.0) digital test capabilities
- Configurable offline and inline operation on shared platform
- SMEMA interface for integrated inline automation
- Auto Debug fine-tunes tests for production-ready results
- Statistical measures including CPK analysis
Typical Applications Inline and offline PCBA manufacturing test; contract manufacturing; high-volume electronics assembly requiring space-constrained test integration.
Compatibility & Integration
- SCPI command support
- USB 2.0 interface (TMC-488.2 compliant)
- IVI-COM and LabVIEW drivers included
- External power supply support
- Test programs and fixtures developed offline transfer directly to inline deployment
Agilent / Keysight U9405A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Agilent / Keysight U9405A. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Agilent / Keysight U9405A faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Agilent / Keysight U9405A price
This Agilent / Keysight U9405A is listed at $2,400. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Agilent / Keysight U9405A calibration cost
NIST-traceable calibration for the Agilent / Keysight U9405A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
