NI USB-6009 14-Bit Multifunction DAQ USB Device
The NI USB-6009 is a low-cost, multifunction DAQ device with 8 analog inputs (14-bit, 48 kS/s), 2 analog outputs (12-bit, 150 Hz), 13 digital I/O lines, and a 32-bit counter. It connects to a computer via USB and is ideal for basic data logging, portable measurements, and academic projects.
- Model
- NI USB-6009
- Calibration
- Available on request
- Price
- $539
- Status
- In stock
- RFQ ref
- USB-6009
This unit
The NI USB-6009 is a 14-bit multifunction DAQ device engineered for data logging, portable field measurements, and academic research. Bus-powered via USB 2.0, it requires no external power supply and integrates directly with NI-DAQmx driver software for simplified configuration and control.
Technical Specifications
Analog Input- 8 single-ended or 4 differential channels
- 14-bit resolution (differential); 13-bit (single-ended)
- 48 kS/s aggregate sample rate
- Differential input ranges: ±20 V, ±10 V, ±5 V, ±4 V, ±2.5 V, ±2 V, ±1.25 V, ±1 V
- Single-ended input range: +10 V
- 144 kΩ input impedance
- ±35 V overvoltage protection
- 512-byte FIFO buffer
- 41.67 ns timing resolution (24 MHz timebase); 100 ppm timing accuracy Analog Output
- 2 channels at 12-bit resolution
- 150 Hz maximum update rate (software-timed)
- 0 V to +5 V output range
- 50 Ω output impedance; 5 mA drive current
- 0 V power-on state Digital I/O
- 13 individually programmable lines
- CMOS, LVTTL, and TTL compatible
- Open-drain and push-pull output options
- ±8.5 mA source/sink current (active drive)
- Input thresholds: Low (−0.3 V to +0.8 V), High (2.0 V to +5.8 V) Counter
- 32-bit edge counter (falling-edge)
- 5 MHz maximum input frequency
- 100 ns minimum pulse width (high and low)
- 4.7 kΩ pull-up to 5 V Power & References
- +5 V source: 200 mA maximum
- +2.5 V external reference: 1 mA maximum
Key Features
- Full-speed USB 2.0 interface (12 Mb/s)
- Bus-powered operation - no external supply needed
- Screw-terminal signal connectivity
- Compact form factor: 81.8 mm × 85.1 mm × 23.2 mm with connectors
- Weight: 85 g (with connectors)
Typical Applications
- Environmental and sensor data logging
- Portable test and measurement systems
- Educational laboratory experiments
- Low-speed process monitoring
Compatibility & Integration NI-DAQmx driver software enables configuration across Windows and Linux platforms. USB Series B connector provides standard connectivity to host computers.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | '+10 V (single-ended) |
| Analog Output | 0 V to +5 V |
| Digital I/O | −0.3 V to +5.8 V |
| Power | +5 V @ 200 mA, +2.5 V @ 1 mA, Analog Input: ±20 V to ±1 V (differential) |
NI USB-6009 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the NI USB-6009. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
NI USB-6009 price
This NI USB-6009 is listed at $539. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
NI USB-6009 calibration cost
NIST-traceable calibration for the NI USB-6009 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
