IOtech DaqBook/2000
IOtech Data Acquisition Systems (DAQ). Resolution: 16-bit.
- Model
- IOtech DaqBook/2000
- Calibration
- Available on request
- Price
- $1,450
- Status
- In stock
- RFQ ref
- DaqBook/2000
This unit
The IOtech DaqBook/2000 is a modular data acquisition system delivering 16-bit resolution at 200 kHz sampling rates for laboratory and portable measurement applications. It combines analog input, output, and digital I/O in a single chassis, with extensive expansion capability through the DBK modular signal conditioning system.
Technical Specifications Analog-to-Digital Converter
Resolution: 16-bit
Maximum sampling rate: 200 kHz
Channel scan rate: 5 µs per channel Analog Inputs (P1 Connector)
Configuration: 16 single-ended or 8 differential inputs
Programmable ranges: 13 software-selectable options from ±10 V full scale to ±156 mV full scale
Per-channel software configuration for range, input mode, and polarity
Expandable to 256 channels via DBK signal conditioning modules while maintaining 200 kHz scan rate Analog Outputs (P3 Connector / Optional DBK46)
Available on /2001 and /2020 models
Four channels at 16-bit resolution
Maximum output rate: 100 kHz
Output range: -10 V to +10 V
Supports continuous waveform output via Bus Mastering DMA from PC memory or disk Digital I/O
On-board: 40 lines
P2 connector: 24 general-purpose lines or expansion port for up to 192 external lines
P3 connector: 16-bit digital port
Expandable to 272 total digital I/O channels (256 via P2 expansion)
Support for TTL-level, relay, and optically isolated I/O types
High-speed digital inputs acquired as A/D channel 272 using ADC pacing clock (16-bit word) Counters and Timers (P3 Connector)
Four counter/pulse input channels
Two timer/pulse output channels
Synchronous or asynchronous operation with analog inputs
Key Features
Three 37-pin DSUB connectors (P1, P2, P3) on front panel for signal connectivity
100-pin rear connector (P4) for DBK200 Series device expansion
Modular DBK signal conditioning architecture for custom configurations
Per-channel software configurability across all input modes and ranges
Compatibility & Integration Integrates with the complete DBK signal conditioning and expansion module family, supporting specialized measurement requirements across industrial, research, and embedded data acquisition applications.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | '-10 V to +10 V (analog output) |
IOtech DaqBook/2000 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the IOtech DaqBook/2000. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
IOtech DaqBook/2000 price
This IOtech DaqBook/2000 is listed at $1,450. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
IOtech DaqBook/2000 calibration cost
NIST-traceable calibration for the IOtech DaqBook/2000 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
