Dewetron PAD-TH8-P 8-Channel Thermocouple and RTD Rear Plug-In Module
Dewetron Data Acquisition Systems (DAQ). Channels: ** 8 isolated thermocouple and RTD channels, Current: ** 390 µA.
- Model
- Dewetron PAD-TH8-P
- Calibration
- Available on request
- Price
- $1,450
- Status
- In stock
- RFQ ref
- PAD-TH8-P
This unit
The Dewetron PAD-TH8-P is an 8-channel rear plug-in module for simultaneous thermocouple and RTD temperature measurement in industrial, automotive, and aerospace test environments. It delivers isolated channels with cold junction compensation on thermocouple inputs and configurable RTD excitation, integrating directly into Dewetron data acquisition systems via RS-485 or CAN protocols. The module supports eight thermocouple types and three RTD standards, making it suitable for multi-sensor thermal monitoring across diverse temperature ranges and sensor configurations.
Technical Specifications
Channels: 8 isolated thermocouple and RTD channels
Thermocouple Types: J, K, T, E, R, S, B, N
RTD Standards: PT100, PT500, PT1000 (3-wire and 4-wire configurations)
Thermocouple Input Range: ±150 mV
Cold Junction Compensation: Per-channel
RTD Excitation Current: 390 µA
Bandwidth (-3 dB): 48 Hz
Maximum Sampling Rate: 200 S/s per channel (CAN); 10 S/s per channel (RS-485)
Data Readout Speed: Up to 80 ch/sec @ 9600 bps (RS-485); up to 50 ch/sec (system dependent)
Key Features
Full channel isolation prevents crosstalk and ground-loop interference
Per-channel cold junction compensation for thermocouple accuracy
Programmable RS-485 communication: 2400–115200 bps (standard 9600 bps, 8 data bits, 1 stop bit, no parity)
CAN 2.0B interface support with configurable protocol
Flexible RTD configuration supporting both 3-wire and 4-wire measurement topologies
Rear plug-in architecture for direct integration with Dewetron base units
Typical Applications Thermal monitoring in engine testing, materials characterization, environmental chambers, battery thermal profiling, and multi-point temperature acquisition in production validation and failure analysis workflows.
Compatibility & Integration Designed as a plug-in module for Dewetron data acquisition platforms. Communicates via RS-485 (baudrate programmable) or CAN 2.0B, allowing flexible system configuration and remote module addressing.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | ±150 mV (thermocouple) |
Dewetron PAD-TH8-P — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Dewetron PAD-TH8-P. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Dewetron PAD-TH8-P price
This Dewetron PAD-TH8-P is listed at $1,450. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Dewetron PAD-TH8-P calibration cost
NIST-traceable calibration for the Dewetron PAD-TH8-P is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
