Fluke 117 CAL True-RMS Digital Multimeter
The Fluke 117 CAL is a true-RMS digital multimeter designed for electricians and HVAC technicians. It features a large, backlit display, voltage detection, and provides accurate readings for various electrical parameters. This model comes with a calibration certificate.
- Model
- Fluke 117 CAL
- Calibration
- Available on request
- Price
- $390
- Status
- In stock
- RFQ ref
- 117 CAL
This unit
The Fluke 117 CAL is a True-RMS digital multimeter purpose-built for electricians and technicians in commercial and industrial environments. It delivers precise measurements across voltage, current, resistance, and frequency with a 6,000-count display and 33-segment bar graph. The instrument includes NIST-traceable calibration certification, VoltAlert™ non-contact voltage detection, AutoVolt automatic AC/DC selection, and LoZ mode to eliminate ghost voltage errors. True-RMS capability ensures accuracy on both linear and non-linear loads - critical for diagnosing modern electrical systems.
Technical Specifications Display & Updates
6,000-count digital display, 4 updates/second
33-segment bar graph, 32 updates/second Environmental
Operating temperature: -10 °C to +50 °C
Storage temperature: -40 °C to +60 °C
Safety rating: CAT III 600 V Power
9-volt alkaline battery (NEDA 1604A/IEC 6LR61)
400-hour typical battery life (without backlight) Voltage Measurement
AC voltage: 6 V to 600 V; resolution 0.001 V to 0.1 V; accuracy ±(0.5% + 2 counts)
DC voltage: 0.001 V to 600 V; resolution 0.001 V to 0.1 V; accuracy ±(0.5% + 2 counts) Current Measurement
AC/DC current: 6 A to 10 A; resolution 0.001 A to 0.01 A; accuracy ±(1.5% + 3 counts) at 6.000 A range
20 A overload protection for 30 seconds Additional Measurements
Resistance: 0.1 Ω to 40 MΩ; 0.1 Ω resolution
Capacitance: 1 nF to 9,999 µF
Frequency: 5 Hz to 100 kHz (AC voltage)
Continuity: 250 Ω beeper off; 500 µs detection
Diode test
Min/Max/Average recording
Key Features
VoltAlert™ technology for non-contact voltage sensing
AutoVolt automatic voltage mode selection
LoZ (low impedance) mode suppresses false readings
True-RMS measurement for non-linear load analysis
NIST-traceable calibration certificate included
Typical Applications Electrical troubleshooting, circuit diagnostics, load analysis, equipment maintenance, and field service work in commercial and industrial installations.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 5 Hz to 100 kHz | Voltage / Current Range: 0.001 V to 600 V AC/DC, 6 A to 10 A AC/DC |
Fluke 117 CAL — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Fluke 117 CAL. Calibration covers DC voltage accuracy at all ranges, AC voltage (True RMS) accuracy at 50 Hz, 1 kHz, and 10 kHz, DC current accuracy, resistance accuracy at all decade ranges, frequency accuracy, and diode test voltage. Fluke 87V and 289 also include capacitance and temperature calibration.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Fluke 117 CAL faults: blown input fuse, worn input jacks, display segment failure, relay contact wear on bench DMMs. Common faults include worn input jacks (banana socket contact wear on the mA and COM terminals), blown input fuses (especially the 440 mA HRC fuse), and display segment failures. Keithley 2000/2001/2002 bench DMMs commonly develop relay contact wear affecting resistance accuracy after extended service.
Fluke 117 CAL price
This Fluke 117 CAL is listed at $390. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Fluke 117 CAL calibration cost
NIST-traceable calibration for the Fluke 117 CAL is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers DC voltage accuracy at all ranges, AC voltage (True RMS) accuracy at 50 Hz, 1 kHz, and 10 kHz, DC current accuracy, resistance accuracy at all decade ranges, frequency accuracy, and diode test voltage. Fluke 87V and 289 also include capacitance and temperature calibration.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
