Anritsu 69365A Synthesized Sweep/Signal Generator, 0.5 – 40 GHz
Anritsu 69365A Synthesized Sweep/Signal Generator, 0.5 – 40 GHz, is optimized for cost-effective, high-quality signal generation covering broad frequencies. It is ideal for calibration and general lab testing.
- Model
- Anritsu 69365A
- Calibration
- Available on request
- Price
- $16,730
- Status
- In stock
- RFQ ref
- 69365A
This unit
The Anritsu 69365A is a synthesized sweep/signal generator delivering cost-effective, high-quality signal generation across 0.5 GHz to 40 GHz. Built for calibration and general laboratory testing, it combines multiple sweep modes with precise frequency control and flexible modulation capabilities.
Technical Specifications
Frequency Range: 0.5 GHz to 40 GHz Frequency Resolution: 1 kHz standard; 0.1 Hz with Option 11 Spurious Signals: Harmonic and harmonic-related spurious < -50 dBc (500 MHz to 2.2 GHz) Time Base Stability:- Internal: < 2 × 10⁻⁸/day aging; < 2 × 10⁻⁸/°C (0°C to 55°C)
- Option 16: < 5 × 10⁻¹⁰/day Reference I/O:
- 10 MHz reference output: 0.5 V p-p into 50 Ω, AC coupled
- External 10 MHz reference input supported Control Interface: GPIB
Key Features Sweep Modes:
- CW Mode: Twenty independent, presettable frequencies
- Step Sweep: Phase-locked frequency stepping with user-selectable step count or size; < 15 ms + 1 ms/GHz step or < 40 ms switching; dwell 1 ms to 99 seconds
- Analog Sweep: 1 MHz to full-range continuous sweep
- Alternate Sweep: Dual-range operation with independent power level assignment Modulation: Internal AM, FM, phase, and pulse modulation; 7 modulating waveforms; user-downloadable complex modulation
Typical Applications Device calibration, RF component characterization, system testing across microwave and millimeter-wave bands, and frequency-agile measurement scenarios.
Compatibility & Integration GPIB remote control enables integration into automated test systems. External 10 MHz reference input allows phase-locked operation with master frequency standards.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 0.5 GHz to 40 GHz | Voltage / Current Range: 0.5 V p-p (10 MHz reference output into 50 Ω) |
Anritsu 69365A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Anritsu 69365A. Calibration covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Anritsu 69365A faults: YIG oscillator failure (no output or loss of lock), step attenuator wear (output drops or steps at set attenuation), ALC loop failure (uncontrolled output power), I/Q modulator assembly failure. HP/Agilent 836xx series most common faults are YIG oscillator failure and step attenuator contact wear causing output steps or drops at specific attenuation settings. Keysight E4428C/E4438C units most commonly develop ALC loop failure and I/Q modulator assembly faults. YIG oscillator replacement and attenuator service are stocked repairs.
Anritsu 69365A price
This Anritsu 69365A is listed at $16,730. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Anritsu 69365A calibration cost
NIST-traceable calibration for the Anritsu 69365A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output frequency accuracy, output power level accuracy across the full frequency range, AM/FM/PM/pulse modulation accuracy, harmonic and spurious output levels, and phase noise floor verification. Turnaround is 1 to 3 business days after receipt. See full calibration details →
