Kontron / PEP CP605 cPCI Processor Module (2.2 GHz Processor, 1 GB Total Memory, J1-J5 Connectors)
The Kontron/PEP CP605 is a cPCI processor module featuring a 2.2 GHz processor and 1 GB of total memory. It includes J1-J5 connectors for versatile connectivity options. Designed for demanding applications, this module provides reliable performance and expansion capabilities in a compact form factor.
- Model
- Kontron / PEP CP605
- Calibration
- Available on request
- Price
- $1,450
- Status
- In stock
- RFQ ref
- CP605
This unit
The Kontron/PEP CP605 is a 4HP CompactPCI processor module built around the Mobile Intel Pentium 4 processor up to 2.2 GHz, delivering industrial-grade compute in a compact form factor. This module combines a 512 KB L2 cache, 400 MHz front-side bus, and Intel 845GV chipset with DDR 266 MHz memory (up to 1 GB soldered, expandable to 2 GB via SODIMM) to support demanding embedded and real-time applications requiring both processing power and thermal efficiency.
Technical Specifications
Processor: Mobile Intel Pentium 4, 2.2 GHz max, 478-pin FCPGA/µFCPGA package, 512 KB L2 cache, 400 MHz FSB
Memory: DDR 266 MHz; up to 1 GB soldered + 1 GB SODIMM expansion (2 GB total maximum)
Chipset: Intel 845GV GMCH, ICH4
Ethernet: 2x Gigabit (front or rear via PICMG 2.16), 1x Fast Ethernet 10/100Base-TX
USB: 5x USB 2.0 ports
Serial: Up to 4x COM RS232
Storage: CompactFlash socket; optional 2.5" hard disk or ATA flash mounting (4HP)
PMC Slot: 32-bit / 33 MHz, 5V signaling (3.3V available)
Power Consumption: 43 W max @ 2.2 GHz
Dimensions: 233 × 160 × 20.5 mm
Operating Temperature: 0°C to 60°C
Storage Temperature: -25°C to 75°C (optional)
Humidity: 93% relative humidity
Key Features
Passive cooling design with integrated 845GV 2D/3D graphics accelerator
PICMG 2.0 Rev. 3.0, PICMG 2.1 R2.0 hot-swap, PICMG 2.16 R1.0 packet-switching backplane compliance
Optional IPMI V1.5 with onboard Baseboard Management Controller (BMC)
Supports system master or peripheral PCI passive mode operation
Watchdog timer and hardware monitor functionality
Front-panel connectors: VGA, COM, Ethernet, USB, LEDs, reset button
Typical Applications Industrial automation, embedded telecommunications, real-time control systems, and edge computing environments requiring compact, thermally efficient processor modules with multi-protocol connectivity.
Compatibility & Integration Fully compatible with CompactPCI backplanes supporting PICMG 2.0 and later specifications. Accepts standard 32-bit PMC expansion modules and integrates with optional rear I/O modules such as CP-RIO6-05 for extended interface configurations.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 266 MHz (DDR Memory), 33 MHz (PMC), 400 MHz (Front Side Bus) | Voltage / Current Range: 5V signaling (3.3V available on PMC) |
Kontron / PEP CP605 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Kontron / PEP CP605. Calibration covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common Kontron / PEP CP605 faults: power supply failure (cRIO-9073/9074), C-series slot connector wear, PXI chassis fan failure, GPIB interface failure on VXI controllers, BIOS/EEPROM corruption. NI CompactRIO most common faults are power supply failure on older cRIO-9073/9074 chassis and C-series module slot connector wear from repeated hot-swap cycles. PXI chassis fan failure is the most common wear item — chassis fans are field-replaceable. VXI embedded controllers most commonly develop EEPROM corruption and GPIB interface failure.
Kontron / PEP CP605 price
This Kontron / PEP CP605 is listed at $1,450. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Kontron / PEP CP605 calibration cost
NIST-traceable calibration for the Kontron / PEP CP605 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers analog input channel accuracy and offset at all gain settings, analog output accuracy, digital I/O logic threshold verification, sample rate and timing accuracy, and trigger and synchronization bus functional verification. NI CompactRIO and PXI chassis also undergo backplane trigger line integrity check.. Turnaround is 1 to 3 business days after receipt. See full calibration details →
