GE / Bently Nevada 1701/06 Isolator Terminal Base (ITB)
GE / Bently Nevada Signal Conditioning Modules. Voltage: ** 250 Vac continuous.
- Model
- GE / Bently Nevada 1701/06
- Calibration
- Available on request
- Price
- $375
- RFQ ref
- 1701/06
This unit
The GE / Bently Nevada 1701/06 Isolator Terminal Base (ITB) is a signal conditioning interface module for the FieldMonitor™ Series and 3500 System machinery protection platforms. It enables intrinsically safe transducer installations in hazardous areas by galvanic isolation, eliminating external safety barriers when paired with the 170190 Dual Galvanic Isolator. The ITB mounts in non-hazardous or Division 2/Zone 2 environments while permitting connected transducers to operate in Division 1, Zone 1, or Zone 0 hazardous locations.
Technical Specifications
Isolation Voltage: 250 Vac continuous; 1500 Vac test
Power Input: +19 Vdc to +33 Vdc
Power Dissipation: 36 W at +24 Vdc (complete 4-monitor system configuration)
Operating Temperature: −40°C to +85°C (−40°F to +185°F); −20°C to +70°C (−4°F to +158°F) ambient at modules
Storage Temperature: −40°C to +85°C (−40°F to +185°F)
Housing Material: Thermoplastic
Weight (base unit): 1.6 kg (3.5 lb)
Dimensions (modules installed): 12.7 cm × 20.32 cm × 50.80 cm (5 in × 8.0 in × 20.00 in)
Key Features
Screw terminals rated 12–22 AWG for signal I/O connections
8-conductor Euro terminal for single Keyphasor channel (16–18 AWG)
Flexbus connector support for modular I/O expansion via Flex extender cables
Coaxial output capability for signal transmission
DIN rail (35 mm low-profile) or bulkhead mounting (6 × #10 bolts)
Typical Applications
Vibration monitoring in classified hazardous locations
Transducer signal isolation and conditioning in industrial machinery protection systems
Multi-sensor machinery condition monitoring with intrinsic safety compliance
Compatibility & Integration The 170190-01 Dual Galvanic Isolator pairs with 170133 and 170172 Internal Dual Proximitor sensors, standard Bently Nevada Proximitor, Velomitor, and accelerometer transducers using 170180 I/O modules. The 170190-02 variant accommodates CEC 4-131 and equivalent velocity transducers. CSA/NRTL/C hazardous area certification: Class I, Division 1, Groups A, B, C, D; Class I, Zone 1.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | '+19 Vdc to +33 Vdc input |
GE / Bently Nevada 1701/06 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the GE / Bently Nevada 1701/06. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
GE / Bently Nevada 1701/06 price
This GE / Bently Nevada 1701/06 is listed at $375. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
GE / Bently Nevada 1701/06 calibration cost
NIST-traceable calibration for the GE / Bently Nevada 1701/06 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
