HP / Agilent 4352B 3 Ghz Signal Analyzer
HP / Agilent Microwave Analyzers. Resolution: Measurement range ÷ 40, Accuracy: ±(Measurement range × 0.1% + external timebase a, Resolution: 50 Hz.
- Model
- HP / Agilent 4352B
- Calibration
- Available on request
- Price
- $2,070
- Status
- In stock
- RFQ ref
- 4352B
This unit
The HP/Agilent 4352B is a dual-mode signal analyzer for characterizing Voltage Controlled Oscillators (VCOs) and Phase-Locked Loops (PLLs) in RF wireless applications. Operating as both a signal analyzer and VCO tester, it covers 100 MHz to 3 GHz natively, with extension to 12.6 GHz via the optional HP 43521A downconverter. The instrument delivers laboratory-grade analysis for design validation alongside production-line measurement speed.
Technical Specifications Frequency Measurement
Measurement range: 100 MHz to 3 GHz
Frequency span: 2 MHz, 20 MHz, MAX
Resolution: Measurement range ÷ 40,000 Hz
Accuracy: ±(Measurement range × 0.1% + external timebase accuracy)
Transient resolution: 50 Hz; time resolution: 12.5 µs RF Power Measurement
Input range: −10 to +20 dBm
Absolute accuracy: ±3 dBm @ −10 dBm, RF ATT = 10 dB (typical)
Relative accuracy: 0.5 dB (typical)
Input impedance: 50 Ω; VSWR <1.5 (@ <2 GHz), <1.3 (typical) Phase Noise Measurement
Performance: −157 dBc/Hz @ 1 MHz offset (typical)
Measurement points: Up to 801 from 100 Hz to 10 MHz offset
Sweep time: 7.4 seconds
Carrier lock: Automatic via carrier lock multi-mode PLL technology Spectrum Analysis
FFT spectrum analyzer capability included FM Deviation
Range: 0 to 200 kHz peak
Accuracy: ±(2% + 0.1% of measurement) @ 1 kHz FM rate DC Control & Power Supply
VCO tuning supply: 0 to +15.5 V, 50 mA max.; 1 mV resolution; ±(0.2% + 2 mV) accuracy
Control voltage source: 0 to +20 V, 100 µV steps, 20 mA max.; ±(0.1% + 20 mV) accuracy (Option 001: −15 to +35 V)
Control voltage noise: <1 nV/√Hz @ 10 kHz offset Filtering & Signal Generation
HP filters: 50 Hz, 300 Hz
LP filters: 3 kHz, 15 kHz, 20 kHz
1 kHz signal source for VCO characterization
Residual FM: <3 Hz rms (300 Hz – 3 kHz bandwidth)
Key Features
Dual measurement modes: signal analyzer and VCO tester
Excellent phase noise characterization with automatic carrier tracking
Integrated DC supply and ultra-low-noise control voltage source for complete VCO tuning evaluation
High frequency resolution and transient measurement capability
GPIB interface for automated test sequences
Typical Applications
VCO characterization and tuning curve generation
PLL phase noise and transient response evaluation
RF component validation in wireless transceiver design
Production-line acceptance testing of oscillators
Compatibility & Integration
Extends to 12.6 GHz with HP 43521A downconverter option
DC control voltage source supports Option 001 extended polarity range (−15 to +35 V)
GPIB control for integration into automated measurement systems
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 100 MHz to 3 GHz (extends to 12.6 GHz with HP 43521A downconverter) | Power Range (dBm): −10 to +20 dBm | Voltage / Current Range: VCO supply: 0 to +15.5 V @ 50 mA max. |
| Control voltage | 0 to +20 V @ 20 mA max. (Option 001: −15 to +35 V) |
HP / Agilent 4352B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the HP / Agilent 4352B. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
HP / Agilent 4352B price
This HP / Agilent 4352B is listed at $2,069.8. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
HP / Agilent 4352B calibration cost
NIST-traceable calibration for the HP / Agilent 4352B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
