HP / Agilent 54504A 400 MHz digitizing oscilloscope, 2 ch.

The HP/Agilent 54504A is a 400 MHz, 2-channel digitizing oscilloscope engineered for electronic test and measurement applications requiring high-speed waveform acquisition and analysis. Dual 200 MSa/s digitizers deliver 400 MHz bandwidth in repetitive mode and 50 MHz single-shot bandwidth, with advanced triggering, automatic waveform measurements, and dual timebase windowing. Full HP-IB programmability enables seamless integration into automated test systems.

Technical Specifications

Bandwidth: 400 MHz (repetitive), 50 MHz (single-shot)

Channels: 2

Sample Rate: 200 MSa/s

A/D Resolution: 8-bit

Vertical Sensitivity: 1 mV to 5 V/div (1-2-5 sequence)

Input Impedance: 1 MΩ or 50 Ω, switchable

Time Base: 1 ns/div to 5 s/div (1-2-5 sequence); dual timebase windowing

Triggering: Advanced logic, TV, ECL/TTL presets; 14.0 ns minimum internal pulse width, 2.8 ns external

External Trigger Input: 1 MΩ or 50 Ω switchable impedance

Memory: 4 nonvolatile setup memories, 4 nonvolatile waveform memories, 2 volatile pixel memories

Display: CRT

Power: 115/230 VAC, 48–66 Hz, 200 W maximum

Operating Temperature: Valid ±10 °C from calibration temperature; 2.5 MHz/°C bandwidth reduction above +35 °C; 0.08%/°C vertical gain drift

Dimensions: 194.3 mm H × 422.3 mm W × 355.6 mm D

Weight: 10 kg net, 20 kg shipping

Key Features

Automatic waveform parameter and pulse measurements

Automatic limit testing

Pre-trigger display capability

Pushbutton hardcopy output

Four nonvolatile setups and waveform storage

Typical Applications Designed for repetitive signal analysis, single-shot transient capture, and automated test environments requiring high sampling rates and flexible trigger configurations.

Compatibility & Integration Full HP-IB programmability facilitates integration into ATE systems. Supplied with two HP 10430A 10:1 10 MΩ probes. Optional rackmount kit and alternative probe configurations available.