HP / Agilent 54610B 2 Channel, 500MHz Oscilloscope
The HP/Agilent 54610B is a 2-channel, 500 MHz bandwidth oscilloscope. It offers real-time sampling and a variety of measurement features for analyzing electronic signals. Ideal for electronics testing, troubleshooting, and design verification.
- Model
- HP / Agilent 54610B
- Calibration
- Available on request
- Price
- $400
- Status
- In stock
- RFQ ref
- 54610B
This unit
The HP/Agilent 54610B is a 2-channel, 500 MHz digital oscilloscope delivering real-time signal analysis for electronics testing, troubleshooting, and design verification. It combines familiar analog controls with digital signal processing to provide bright, stable waveform display with fast screen update rates and pre-trigger viewing capability. The instrument captures events at 20 MSa/s single-shot sampling with a 4,000-point record length and displays up to 1,500,000 points per second. Autoscale automatically configures voltage, time, and trigger parameters, while Autostore displays the current waveform at full brightness alongside previous acquisitions at half brightness for direct comparison. Horizontal accuracy of ±0.01% and ±2% DC gain accuracy ensure measurement confidence across production line test and general-purpose troubleshooting applications.
Technical Specifications Acquisition
Bandwidth: 500 MHz
Channels: 2
Sample Rate (single shot): 20 MSa/s
Maximum Display Update Rate: 1,500,000 points/sec
Record Length: 4,000 points
Horizontal Accuracy: ±0.01%
Horizontal Resolution: 100 ps Vertical System
Sensitivity Range: 2 mV/div to 5 V/div
DC Gain Accuracy: ±2%
Input Coupling: DC, AC, or Ground
Bandwidth Limit: Approximately 30 MHz
Inversion: CH 1 and CH 2
Dynamic Range: ±12 div from center screen
Maximum Input: 250 V (DC + peak AC) Horizontal System
Timebase Range: 5 s/div to 1 ns/div
Delayed Sweep: Available (up to 200X magnification) Trigger System
Sources: CH 1, CH 2, Line, or External
Trigger Sensitivity (DC to 100 MHz): 0.5 div or 5 mV
TV Triggering: TV line and field, non-interlaced video support
Viewable External Trigger: Yes Input Impedance
Selectable: 1 MΩ (~9 pF) or 50Ω
50Ω Input Protection: Active when powered on
Key Features
Pre-trigger viewing for event capture before trigger point
Autoscale function for automatic parameter configuration
Autostore waveform comparison capability
Peak detect with 50 ns glitch capture
Selectable input impedance matching
Typical Applications
Production line test and quality assurance
General-purpose electronics troubleshooting
Design verification and signal analysis
Video signal characterization with TV triggering support
Compatibility & Integration External trigger input supports measurement integration with external signal sources and test automation systems.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | DC to 25 MHz (trigger sensitivity) | Voltage / Current Range: 2 mV/div to 5 V/div |
HP / Agilent 54610B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the HP / Agilent 54610B. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
HP / Agilent 54610B price
This HP / Agilent 54610B is listed at $399.58. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
HP / Agilent 54610B calibration cost
NIST-traceable calibration for the HP / Agilent 54610B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
