HP / Agilent 54620A 16 Channel Logic Analyzer

The HP/Agilent 54620A is a 16-channel logic analyzer designed for digital circuit analysis and troubleshooting. It offers high-speed data acquisition and comprehensive triggering capabilities, allowing users to capture and analyze complex digital signals. Ideal for engineers and technicians working with embedded systems and digital electronics.

Model
Keysight 54620A
Calibration
Available on request
Price
$404
RFQ ref
54620A
View cart
Prefer to talk? Call +1 (484) 841-9341

This unit

The HP/Agilent 54620A is a 16-channel logic analyzer built for digital circuit debugging and signal analysis. It combines a scope-like interface with advanced triggering and measurement capabilities, capture and characterize complex digital behavior at up to 500 MSa/s. The instrument's glitch capture down to 3.5 ns and sophisticated pattern-based triggering make it effective for embedded systems diagnostics, protocol analysis, and timing verification across TTL, CMOS, ECL, and user-defined logic levels.

Technical Specifications

Channels: 16 timing channels

Maximum Sample Rate: 500 MSa/s

Glitch Capture: 3.5 ns

Record Length: 2K samples (8 ns ≤ sample period, with auto-glitch at 1 µs/div to 1 s/div); 8K samples (4 ns and 2 ns periods, 500 ns/div and faster sweep speeds, all speeds with auto-glitch enabled)

Display Update Rate: 15 full screens per second

Input Impedance: ~1 MΩ and 12 pF

Logic Level Support: TTL, CMOS, ECL, or user-definable voltage

Minimum Trigger Duration: 2 sample periods or 16 ns, whichever is greater

Trigger Output Rate: 2 kHz (analyzer stopped); 20 per second (running)

Key Features

Edge triggering with rising, falling, or either edge selection

Pattern triggering across all channels with don't-care capability plus external trigger input

Advanced triggering including duration times, sequence detection, pattern duration measurement, and edge occurrence counting

Advanced operators: OR, Then, Entered, Exited, Duration > time, Occurs N times

Automated measurements: Frequency, period, duty cycle, width, delay, setup and hold time

Dual cursor system for time-domain measurements and waveform value readout in Hex or Binary

16 front-panel setup storage and recall

Two trace pixel memories for waveform capture and analysis

Autoscale function for instant channel scaling

Four-processor architecture enabling high-speed responsive display of dynamic signals

Display Options

54620A: Monochrome raster CRT

54620C: Full-color active matrix LCD

Compatibility & Integration

Optional HP-IB (IEEE-488) or RS-232-C remote control

Compatible with Agilent 54650A, 54651A, and 54652B interface modules

PC connectivity support available

Keysight 54620A — Repair & Calibration Service

Aumictech offers NIST-traceable calibration and repair for the Keysight 54620A. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.

Standard Cal
$450
Pass/fail cert + NIST sticker
Cal with Data
$650
Full NIST cert with measured values

Keysight 54620A price

This Keysight 54620A is listed at $403.68. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.

Keysight 54620A calibration cost

NIST-traceable calibration for the Keysight 54620A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →

Documents