Agilent/Keysight 5517C

Agilent / Keysight Optical Light Sources. Wavelength: 633 nm, Accuracy: ±0.1 ppm standard.

Model
HP 5517C
Calibration
Available on request
Price
$1,140
RFQ ref
5517C
View cart
Prefer to talk? Call +1 (484) 841-9341

This unit

The Keysight 5517C is a helium-neon laser head that delivers a stable 633 nm wavelength source for precision measurement and laser interferometry systems. This Class II gas laser produces continuous-wave output across multiple power options (180 µW minimum to 1 mW maximum), with wavelength stability of 2 ppb over one hour and 20 ppb lifetime. The 5517C generates a coherent, collimated two-frequency beam with orthogonal polarization components, standard 6 mm diameter (3 mm and 9 mm options available), and beam height of 79.5 ± 1.0 mm.


Warm-up time is approximately 10 minutes typical, extending to 90 minutes with fan connection.


Technical Specifications



  • Wavelength: 633 nm

  • Output Power: 180 µW minimum; 1 mW maximum (H03: 300 µW, H05: 240 µW, H07: 400 µW options)

  • Wavelength Stability: 2 ppb (1 hour); 20 ppb (lifetime)

  • Wavelength Accuracy: ±0.1 ppm standard; ±0.02 ppm with optional calibration

  • Reference Frequency: 2.4 to 3.0 MHz

  • Operation Mode: Continuous Wave (CW)

  • Warm-up Time: 10 minutes typical; up to 90 minutes with fan connection

  • Input Power: +15 V ±0.3 V at 2.5 A max; −15 V ±0.3 V at 0.02 A max

  • Heat Dissipation: 23 W (operation); 35 W (warm-up)

  • MTBF: >50,000 hours


Key Features



  • Two-frequency coherent beam with orthogonal linear polarization (horizontal and vertical)

  • Beam diameter options: 3 mm, 6 mm (standard), 9 mm

  • Three-position shutter (open, reduced, closed)

  • Resolution down to 2.5 nanometers with resolution extension

  • Maximum linear velocity: 711 mm/s; up to 696 mm/s with E1709A receiver

  • Measurement range: 40 meters nominal for single-axis; multi-axis sum must meet this specification


Typical Applications



  • VME- and PC-based laser interferometer systems

  • Semiconductor lithography alignment and measurement

  • Flat panel display manufacturing

  • High-precision motion measurement systems


Compatibility & Integration



  • Integrates with standard VME and PC-based interferometer platforms

  • Operates with compatible receivers including the E1709A

  • Non-fiber-coupled; direct optical beam delivery

  • Dimensions: 36 cm L × 14 cm W × 13 cm H; weight 3.4 kg

HP 5517C — Repair & Calibration Service

Aumictech offers NIST-traceable calibration and repair for the HP 5517C. Calibration covers output power at specified wavelengths, wavelength accuracy, 15-minute output stability, and modulation frequency accuracy where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.

Standard Cal
$450
Pass/fail cert + NIST sticker
Cal with Data
$650
Full NIST cert with measured values

Common HP 5517C faults: laser diode end-of-life (output below spec), fiber output connector damage, output instability. Common repairs include laser diode replacement when output falls below spec, fiber output connector repair, and thermal management service.

HP 5517C price

This HP 5517C is listed at $1,140. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.

HP 5517C calibration cost

NIST-traceable calibration for the HP 5517C is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output power at specified wavelengths, wavelength accuracy, 15-minute output stability, and modulation frequency accuracy where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →

Documents