Agilent/Keysight 5519B
The Agilent/Keysight 5519B is a laser head designed for high-precision measurement applications. It delivers a stable and accurate laser beam, crucial for demanding scientific and industrial uses. Known for its reliability and performance, it is a key component in laser-based measurement systems.
- Model
- HP 5519B
- Calibration
- Available on request
- Price
- $950
- RFQ ref
- 5519B
This unit
The Keysight 5519B is a two-frequency Helium-Neon laser head engineered for precision displacement measurement and calibration in machine tool, CMM, and linear metrology applications. This continuous-wave HeNe laser delivers stable, accurate output across thermal cycles and operational lifetime by employing dual-frequency technique to suppress beam intensity fluctuation errors. The 5519B integrates into the Keysight 5530 Laser Calibration System and Agilent 5529A/55292A Dynamic Calibrator platforms, providing Class 2 laser output with exceptional wavelength stability and repeatability.
Technical Specifications
- Laser Type: Helium-Neon (HeNe), continuous, two-frequency
- Wavelength: 632.9913540 nm (vacuum, nominal)
- Wavelength Accuracy: ±0.1 ppm (standard); ±0.02 ppm (MIL-STD 45662 calibrated)
- Wavelength Stability: ±0.002 ppm over 1 hour; ±0.02 ppm over lifetime
- Output Power: 180 µW to 1 mW
- Beam Diameter: 6 mm (0.24 in)
- Reference Frequency Output: 3.4 MHz to 4.0 MHz
- Laser Classification: Class 2 (21 CFR 1040.10/1040.11, IEC 60825-1:2007)
- Maximum Axis Velocity: 1 m/s (linear optics); 0.5 m/s (plane mirror); 0.25 m/s (high-resolution plane mirror)
Electrical & Environmental
- Power: 100–240 VAC, 50/60 Hz; alternatives available at 110–120 VAC or 220–240 VAC (48–66 Hz, 400 Hz)
- Warm-up Time: <10 minutes
- Operating Power Dissipation: 23 W (operation); 33 W (warm-up: 50 W)
- Operating Temperature: 0 to 40 °C
- Weight: 5.5 kg (12 lb)
- Clearance Required: 10.16 cm (4 in) beyond rear for cabling
Key Features
- Two-frequency laser architecture minimizes systematic errors from intensity fluctuations
- Exceptional wavelength stability - ±0.002 ppm short-term enables sub-micron repeatability
- Low thermal drift enables extended calibration intervals in production environments
- Class 2 laser safety classification for personnel-proximate industrial use
Typical Applications
- Machine tool accuracy verification and periodic recalibration
- Coordinate measuring machine (CMM) performance validation
- Linear displacement and position measurement systems
- Precision optical calibration in manufacturing metrology
HP 5519B — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the HP 5519B. Calibration covers output power at specified wavelengths, wavelength accuracy, 15-minute output stability, and modulation frequency accuracy where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common HP 5519B faults: laser diode end-of-life (output below spec), fiber output connector damage, output instability. Common repairs include laser diode replacement when output falls below spec, fiber output connector repair, and thermal management service.
HP 5519B price
This HP 5519B is listed at $950. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
HP 5519B calibration cost
NIST-traceable calibration for the HP 5519B is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output power at specified wavelengths, wavelength accuracy, 15-minute output stability, and modulation frequency accuracy where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →