HP/Agilent 83403A: Lightwave Source – 300 kHz to 3 GHz 1550 NM
The HP/Agilent 83403A is a Lightwave Source operating from 300 kHz to 3 GHz at 1550 nm. This instrument provides a stable and precise optical signal for testing and characterization of optical components and systems. Ideal for telecommunications and research applications.
- Model
- HP / Agilent 83403A
- Calibration
- Available on request
- Price
- $3,100
- Status
- In stock
- RFQ ref
- 83403A
This unit
The HP/Agilent 83403A is a precision 1550 nm lightwave source engineered for optical signal generation across 300 kHz to 3 GHz. Operating at less than 3.0 mW output power, this Class I laser delivers stable, low-noise performance into single-mode fiber (9/125 µm core). External RF modulation capability enables amplitude modulation for dynamic optical testing.
The instrument integrates readily into telecommunications test systems and optical component analyzers, supporting characterization of lasers, amplifiers, and fiber networks. Warm-up of 1 hour is recommended prior to critical measurements. Power operation requires 100/120 V or 220/240 V AC with appropriate fusing; a three-prong grounded AC cord is supplied.
Standard fiber optic output connector accommodates 1550 nm SMF.
Technical Specifications
- Wavelength: 1550 nm
- Frequency Range: 300 kHz to 3 GHz
- Optical Output Power: Less than 3.0 mW (nominal)
- Laser Classification: FDA Class I / IEC Class 1
- Fiber Type: Single-Mode Fiber (SMF), 9/125 µm core
- Modulation: Amplitude modulation via external RF source
- Power Supply: 100/120 V or 220/240 V AC, 50/60 Hz
- Fusing (100/120 V): IEC 127 5×20 mm, 0.315 A, 250 V
- Fusing (220/240 V): IEC 127 5×20 mm, 0.16 A, 250 V
- Warm-up Time: 1 hour recommended before performance testing
Key Features
- Stable optical signal with minimal noise across extended frequency range
- Low output power (Class I safety compliance)
- RF input for dynamic amplitude modulation
- Single fiber output for SMF systems
- AC-powered with dual voltage support
Typical Applications
- Telecommunications optical component characterization
- Fiber optic network testing
- Laser and amplifier assessment
- Research and development in optical communications
Compatibility & Integration
- Standalone operation or test system integration
- Compatible with Agilent 8702-series lightwave component analyzers
- Standard fiber optic connector for 1550 nm SMF delivery
- Calibration interval: 12 months
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 300 kHz to 3 GHz | Voltage / Current Range: 100/120 V AC or 220/240 V AC | Wavelength Range: 1550 nm |
HP / Agilent 83403A — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the HP / Agilent 83403A. Calibration covers output power at specified wavelengths, wavelength accuracy, 15-minute output stability, and modulation frequency accuracy where applicable. All calibrations ship with a NIST-traceable certificate. Turnaround is typically 1–3 business days after receipt.
Common HP / Agilent 83403A faults: laser diode end-of-life (output below spec), fiber output connector damage, output instability. Common repairs include laser diode replacement when output falls below spec, fiber output connector repair, and thermal management service.
HP / Agilent 83403A price
This HP / Agilent 83403A is listed at $3,100. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
HP / Agilent 83403A calibration cost
NIST-traceable calibration for the HP / Agilent 83403A is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Calibration for this instrument covers output power at specified wavelengths, wavelength accuracy, 15-minute output stability, and modulation frequency accuracy where applicable. Turnaround is 1 to 3 business days after receipt. See full calibration details →
