HP / Agilent 8447D Amplifier, 100 kHz to 1.3 GHz Gain: & gt; 25 dB
The HP/Agilent 8447D is a solid-state amplifier designed for general-purpose laboratory use. It operates from 100 kHz to 1.3 GHz with a gain of greater than 25 dB. It is suitable for increasing signal levels in various test and measurement applications.
- Model
- HP / Agilent 8447D
- Calibration
- Available on request
- Price
- $675
- Status
- In stock
- RFQ ref
- 8447D
This unit
The HP/Agilent 8447D is a solid-state pre-amplifier that increases receiver sensitivity and signal generator output power across a broad frequency spectrum. Operating from 100 kHz to 1.3 GHz with greater than 25 dB typical gain, the 8447D delivers consistent amplification with minimal noise figure ( 25 dB typical (26 dB @ 20–30°C); ±1.5 dB flatness across full band Noise Figure: +7 dBm at 1 dB gain compression Output Impedance: 50 Ω Input/Output VSWR: 40 dB Harmonic Distortion: ≤ -25 dBc (ALC off); ≤ -20 dBc typical (ALC on) Connectors: BNC standard; Type-N optional (Option 010) Power Supply: 110–230 Vac ±10%, 48–440 Hz, 15 W consumption Operating Temperature: 0 to +55°C Physical Dimensions: 130 × 85.8 × 216 mm (5.1 × 3.4 × 8.5 in); 1.56 kg net
Key Features
Hermetically sealed solid-state construction with thin film hybrid and integrated circuit amplifiers
Exceptional gain flatness with ±0.7 dB variation over 20–30°C operating window
Low noise performance suitable for sensitive receiver applications
High reverse isolation prevents source loading and feedback
Typical Applications
RF signal sensitivity enhancement for spectrum analyzers, power meters, and EMI instruments
Counter and RF voltmeter input conditioning
Signal generator and sweep generator output boosting
Compatibility & Integration Single and dual-channel configurations available. Dual-channel Option 001 (BNC) and Option 011 (Type-N) support parallel amplification for multi-channel test setups.
Specifications
| Parameter | Value |
|---|---|
| Frequency Range | 100 kHz to 1.3 GHz | Power Range (dBm): '+7 dBm output (1 dB compression) | Voltage / Current Range: 110–230 Vac ±10%, 15 W |
HP / Agilent 8447D — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the HP / Agilent 8447D. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
HP / Agilent 8447D price
This HP / Agilent 8447D is listed at $674.98. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
HP / Agilent 8447D calibration cost
NIST-traceable calibration for the HP / Agilent 8447D is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
