Agilent/Keysight 8510E

The Agilent/Keysight 8510E is a complete, unracked vector network analyzer system designed for precision S-parameter measurement of microwave and RF components from 45 MHz to 20 GHz. This preconfigured system integrates the 8510C vector network analyzer, 20 GHz S-parameter test set, 20 GHz synthesized sweeper, and 3.5 mm measurement accessories to enable comprehensive characterization of linear active and passive networks.

Technical Specifications

• Analyzer: Agilent/Keysight 8510C Vector Network Analyzer


• Test Set: 20 GHz S-parameter test set


• Sweeper: 20 GHz synthesized sweeper


• Frequency Range: 45 MHz to 20 GHz


• Test Port Connector: 3.5 mm (f)


• Impedance: 50 ohm Measurement Performance


• Receiver Dynamic Range: 86 dB to 106 dB (varies by frequency band)


• System Dynamic Range: 68 dB to 93 dB (varies by frequency band)


• Power Control Resolution: 0.02 dB


• Reference Power (Port 1): +2 dBm to –25 dBm (frequency and configuration dependent)


• Maximum Power (Port 2): +2 dBm to +20 dBm (frequency and configuration dependent)


• Minimum Power (Port 2): –66 dBm to –97 dBm (frequency and configuration dependent) Analysis Capabilities


• S-parameter measurement with real-time error correction


• Frequency-domain analysis


• Time-domain analysis (optional)


• Display formats: Log/linear magnitude, phase, and group delay


• Two-port network characterization


• Color CRT display with independent dual channels

Key Features Near real-time error correction enables measurement adjustments to the device under test while data acquisition proceeds. Tuned receiver design delivers high sensitivity across the operating range. Two independent display channels support simultaneous measurement visualization.

Typical Applications Characterization of passive and active RF/microwave components including filters, amplifiers, mixers, and transmission line networks across the 45 MHz to 20 GHz band.

Compatibility & Integration The system connects via the 8510C system bus for seamless integration of sources and test sets. Standard 3.5 mm measurement accessories are included. Supports multiple calibration methods including TRL calibration.