Eaton 94593-1 RF Measurement Probe

The Eaton 94593-1 is an electrostatically shielded Programmable Loop Antenna/Coupler designed for use with the Singer Model NM-17/27 EMI/FI Meter. This component facilitates radiated magnetic field strength measurements within the frequency range of 10 kHz to 32 MHz. The system comprises the Loop Antenna Coupler, a mast section, three arms, and a modified coaxial cable.

Technical Specifications * Frequency Range: 10 kHz to 32 MHz, divided into 8 bands. * Band 1: 10 kHz to 250 kHz.

• RF Output Load: Band 1: 10 kHz to 250 kHz.
• Programming Power Required: Band 1: 10 kHz to 250 kHz.
• Shielding: Electrostatic shielding.
• Antenna Correction Factor: Calibrated for performing radiated magnetic field strength measurements.
• Operating Altitude: Operational to at least 4570 m (15000 ft) mean sea level.

Electrical Specifications * Power Source (Manual Operation): Requires an external 12 Vdc power source connected to the + and - binding post terminals on the side of the Antenna/Coupler case.

Interfaces * RF Output Receptacle: Used for connecting to the RF input receptacle of the Model NM-17/27.

• Antenna Control Cable Receptacle: Connects to the Model NM-17/27 for automatic remote band switching.

Physical Specifications * Antenna Configuration: Consists of the Loop Antenna Coupler, a mast section, three arms, and a length of modified coaxial cable.

• Installation: The Mast Assembly (P/N S94031-1) is inserted into the Ferrule Base on top of the Antenna Coupler housing.

Compatibility * Primary System Integration: Designed for use with the Singer Model NM-17/27 EMI/FI Meter.

• Accessory: Antenna Control Cable, Model 94594-1, 20 ft., 19 pin to 41 pins, connects the Loop Antenna/Coupler to the Model NM-17/27 for automatic remote band switching.
• Accessory: RF Transmission Line, Model 92191-1, 20 ft., BNC to BNC, used for connecting the RF OUTPUT receptacle of the Model 94593-1 Antenna/Coupler to the RF input receptacle of the Model NM-17/27.

Modes of Operation * Automatic Band Switching: Enabled when used with the Model NM-17/27, which supplies power and controls band switching.

• Manual Band Switching: Requires an external power supply (12 Vdc) and manual setting of the BAND (MHz) switch on the Antenna/Coupler for the desired frequency band. Why Choose Aumictech for the Eaton 94593-1? At Aumictech, we specialize in supplying high-end test and measurement equipment. Whether you need reliable radiated magnetic field strength measurements, seamless integration with EMI/FI meters, or solid performance in demanding environments, our team ensures the Eaton 94593-1 delivers maximum performance for your application.