Kepco ATE100
Kepco DC Power Supplies. Voltage: ** Selectable ranges - 95 - 113 V.
- Model
- Kepco ATE100
- Calibration
- Available on request
- Price
- $750
- Status
- In stock
- RFQ ref
- ATE100
This unit
The Kepco ATE100 is a precision analog-controlled DC power supply engineered for laboratory and industrial applications requiring stable, reliable power delivery. It combines voltage and current stabilization modes with automatic crossover, full-range front-panel potentiometer control, and optional programmability via analog (0-10V) or digital interfaces. The unit delivers up to 1000 W in full-rack configurations and features programmable overvoltage protection, low-noise cooling, and multiple readout options including analog meters or digital LCD displays.
Technical Specifications
Power Output: 1000 W (full-rack models)
Control Architecture: Analog-controlled with linear, fully dissipative NPN pass transistor section
Output Modes: Voltage stabilization, current stabilization, and automatic mode crossover
Programming Options: 10-turn front-panel potentiometers for full-range control; 0-10 V analog programming; optional digital programming via LCD display (DM suffix); optional IEEE-488 digital control (SN-series interfaces)
Operating Modes: User-selectable slow or fast response; optional fast mode for rapid programming
Overvoltage Protection: Programmable protector with manual front-panel adjustment or 0-10 V analog signal programming
Ripple and Noise: <0.1 mV rms, <1 mV p-p typical in slow mode (model-dependent); ATE 325-0.8M: 10 mV rms maximum, 50 mV p-p maximum
Offset Control: High-gain, zeroable offsets for precise voltage tracking or variable resistance control
Output Impedance: Frequency-dependent series resistance/inductance (voltage mode) and shunt resistance/capacitance (current mode); tabulated values provided
Input Voltage: Selectable ranges - 95–113 V, 105–125 V, 190–226 V, 210–250 V AC; 47–65 Hz
Operating Temperature: 0 °C to 65 °C; 10% output current derating required above 55 °C
Storage Temperature: -40 °C to 85 °C
Cooling: High-efficiency single-bearing fan with low-noise non-metallic blades
Key Features
Mode-status LEDs on front panel
Optional analog meters (M suffix) or digital LCD readouts (DM suffix) for voltage and current monitoring
Multiple output voltage and current configurations (e.g., 0–100 V / 0–10 A, 0–100 V / 0–1 A, 0–100 V / 0–2.5 A)
Compatibility & Integration Analog 0-10 V programming interface and optional IEEE-488 digital control enable integration into automated test and measurement systems.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 0–1 A (ATE 100-1DM) |
| Input | 95–113 V, 105–125 V, 190–226 V, 210–250 V AC |
Kepco ATE100 — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Kepco ATE100. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Kepco ATE100 price
This Kepco ATE100 is listed at $750. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Kepco ATE100 calibration cost
NIST-traceable calibration for the Kepco ATE100 is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
