Kepco ATE36-30DMG
The Kepco ATE36-30DMG is a precision-engineered bench power supply, delivering a stable and adjustable DC output. Designed for laboratory and industrial applications, it offers reliable performance and precise control for a variety of electronic testing and development needs.
- Model
- Kepco ATE36-30DMG
- Calibration
- Available on request
- Price
- $1,250
- Status
- In stock
- RFQ ref
- ATE36-30DMG
This unit
The Kepco ATE36-30DMG is a 1000 W precision programmable DC power supply engineered for laboratory and industrial test environments. It delivers 0–36 VDC at 0–30 ADC with full analog and digital control, ultra-low noise performance, and dual-mode operation with automatic crossover. GPIB remote control, programmable protection circuits, and 40 non-volatile memory locations enable flexible system integration and unattended operation.
Technical Specifications Output Performance
Rated output: 1000 W across 0–36 VDC, 0–30 ADC
Maximum output: 38.3 VDC at rated current; 33 ADC at rated voltage
Ripple and noise: <0.1 mV rms, <1 mV peak-to-peak (20 Hz–10 MHz bandwidth)
Source voltage regulation: <0.0005% Eo max.
Load regulation: <0.01% Io max. (voltage mode), <0.02% Io max. (current mode)
8-hour time drift: <0.005% Eo max.
Internal impedance: 24 mΩ resistance, 1 µH inductance, 10 µH effective series inductance
Output capacitance: 9,500 µF Input Requirements
AC input range: 95–250 VAC
Key Features
Dual analog control channels: Voltage (0–10 V) and current (0–1 V) programmable inputs
Two uncommitted op-amps for signal scaling and inversion
GPIB interface: Full IEEE 488-2 SCPI command support for remote programming and monitoring
Programmable overvoltage crowbar: Settable via front panel or 0–10 V analog signal
Programmable overcurrent protection with adjustable delay
Fast Mode: Microsecond-range programming response and voltage recovery in current-control mode
LCD display for real-time output parameter monitoring
Mode status indicators: Panel LEDs and optically isolated TTL-compatible flag outputs
Non-volatile memory: 40 locations for storing complete operating sequences and parameter sets
User configuration port: PC-12 connector with jumper-selectable settings
Typical Applications Automated test equipment, component characterization, power conversion verification, transient response measurement, thermal cycling simulation.
Compatibility & Integration Full-rack form factor integrates into 19-inch test racks. GPIB enables integration with legacy and modern ATE systems. Analog control inputs support direct connection to arbitrary function generators and control interfaces without additional signal conditioning.
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 0-30 ADC, 0-36 VDC |
Kepco ATE36-30DMG — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Kepco ATE36-30DMG. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Kepco ATE36-30DMG price
This Kepco ATE36-30DMG is listed at $1,250. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Kepco ATE36-30DMG calibration cost
NIST-traceable calibration for the Kepco ATE36-30DMG is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
