Kepco ATE55-20M
The Kepco ATE55-20M is a power supply designed for a variety of applications. It features adjustable voltage and current settings, allowing users to fine-tune the output to meet specific requirements. The ATE series is known for its reliable performance and solid construction, making it suitable for both laboratory and industrial environments.
- Model
- Kepco ATE55-20M
- Calibration
- Available on request
- Price
- $1,100
- Status
- In stock
- RFQ ref
- ATE55-20M
This unit
The Kepco ATE55-20M is a 1000-watt DC power supply built for precision analog control in laboratory and industrial environments. It delivers adjustable voltage and current outputs from 0–55 VDC and 0–20 ADC, with exceptional load regulation and ultra-low ripple. The series-pass architecture with automatic crossover switching provides low output impedance in voltage mode (1.1 mΩ slow, 2 μH fast) and high impedance in current mode, making it suitable for transient testing, device characterization, and signal-following applications.
Technical Specifications
Output: 0–55 VDC, 0–20 ADC (1 kW maximum)
Voltage programming bandwidth: 4.0 kHz minimum; time constant 40 μsec maximum
Ripple and noise (slow mode): <0.1 mV RMS, <1 mV peak-to-peak
Ripple and noise (0–6 mA load effect): 0.3 mV RMS, 3 mV peak-to-peak
Load regulation (voltage mode): <0.0005% of Eomax
Source voltage effect (voltage mode): <0.0005% of Eomax
8-hour drift: <0.005% Eomax (voltage mode), <0.01% Iomax (current mode)
Output impedance (voltage mode): 1.1 mΩ (slow), 2 μH (fast)
Output impedance (current mode): 20 μH (slow), 110 kΩ (fast)
Output capacitance: 5,200 μF (slow), 2.25 μF (fast)
Key Features
Series-pass regulator with automatic voltage/current mode crossover
Local control via 10-turn rheostats; optional locking screw-driver adjustable controls
Remote analog programming with 0–10V signal
Two uncommitted amplifiers for signal conditioning
Optically isolated TTL-compatible mode flag signal
Remote error sensing terminals
Output capacitor connection directly at load
Full-rack form factor: 6.969" H × 19.000" W × 19.874" D
Natural convection cooling
Control and Integration
Multi-terminal user port for jumper-based configuration
Optional digital display or GPIB digital programming modules
Analog remote control with programmable overvoltage crowbar
Rear connector access for all control and flag signals
Specifications
| Parameter | Value |
|---|---|
| Voltage / Current Range | 0–20 ADC, 0–55 VDC |
Kepco ATE55-20M — Repair & Calibration Service
Aumictech offers NIST-traceable calibration and repair for the Kepco ATE55-20M. All calibrations are performed to NIST-traceable standards and ship with a certificate. Turnaround is typically 1–3 business days after receipt.
Kepco ATE55-20M price
This Kepco ATE55-20M is listed at $1,100. Calibration is available separately from $450. Contact us for volume pricing or if you need multiple units.
Kepco ATE55-20M calibration cost
NIST-traceable calibration for the Kepco ATE55-20M is $450 (standard — pass/fail certificate and calibration sticker) or $650 (full measured data at every test point, reference standards documented, traceability chain included). Turnaround is 1 to 3 business days after receipt. See full calibration details →
